Quanzhou Sanqi Engineering Machinery Co.Ltd

enLanguage

classification of excavator

Common excavators are driven by internal combustion engine and electric drive excavators. Among them, electric excavators are mainly used in plateau anoxic and underground mines and other flammable and explosive places.            

According to size, excavators can be divided into large excavators, medium excavators and small excavators.      

 According to the different ways of walking, excavators can be divided into caterpillar excavators and wheel excavators.            

According to the different transmission modes, excavators can be divided into hydraulic excavators and mechanical excavators. Mechanical excavators are mainly used in some large mines.            

According to the use, excavators can be divided into general excavators, mining excavators, marine excavators, special excavators and other different categories.            

According to the bucket, excavators can be divided into forward shovel excavator, back shovel excavator, pull shovel excavator and grab shovel excavator. Forward shovel excavators are mostly used to excavate materials above the surface, while backhoe excavators are mostly used to excavate materials below the surface.            

  1. Backhoe Excavator Backhoe is the most common, backward down, forced earth cutting. It can be used for excavation below the stopping working surface. The basic working methods include ditch end excavation, ditch side excavation, straight line excavation, curve excavation, keeping a certain angle excavation, ultra-deep ditch excavation and ditch slope excavation.           

  2. Forward shovel excavator           

    The shovel action form of forward shovel excavator. It is characterized by "moving upward and forcibly cutting soil". The front shovel has a large excavating force and can excavate the soil above the stopping surface. It is suitable for excavating the dry foundation pit with a height of more than 2m, but the upper and lower ramps should be set up. The bucket of the front shovel is larger than the bucket of the backhoe of the same amount, and the excavatable water content is less than one of 27%.           

    To the third kind of soil, and dump truck with the completion of the entire excavation and transportation operations, but also excavate large-scale dry foundation pits and mounds. According to the difference of excavation route and relative position of transportation vehicle, there are two ways of excavation and unloading: forward excavation and lateral unloading; forward excavation and reverse unloading.           

  3. Scraper           

    The pull shovel excavator is also called the cable shovel excavator. Its excavation features are "back-down, self-weight soil cutting". It is suitable for excavation of Class I and II soils below the stopping surface. When working, the shovel bucket is thrown out by inertia force. It is excavated farther. The excavation radius and depth are larger, but it is not as flexible and accurate as backhoe. Especially suitable for excavating large and deep foundation pit or underwater excavation.           

4. Scraper           

Grab shovel excavator is also called grab excavator. Its excavation features are: "straight up and down, self-weight cutting soil". It is suitable for excavation of soils of Class I and II below the stopping surface. It is often used for excavation of foundation pits and caissons in soft soil areas. Especially suitable for digging deep and narrow foundation pits, dredging old channels and dredging sludge in water, or for loading loose materials such as gravel, slag, etc. There are two excavation methods: trench side excavation and location excavation. If the grab is made into a grille, it can also be used to load ore blocks, wood chips, wood and so on in the storage yard.           

Today's excavators account for the vast majority of all hydraulic rotary excavators. Hydraulic excavator is mainly composed of engine, hydraulic system, working device, walking device and electrical control. Hydraulic system is composed of hydraulic pump, control valve, hydraulic cylinder, hydraulic motor, pipeline, oil tank, etc. Electrical control system includes monitoring disk, engine control system, pump control system, all kinds of sensors, solenoid valves and so on.           Hydraulic excavator generally consists of working device, upper body and lower body. According to its structure and application, it can be divided into caterpillar type, tire type, walking type, full hydraulic, semi-hydraulic, full rotary, non-full rotary, universal, special, articulated, telescopic arm type and other types.           

The working device is a device that directly completes the excavation task. It is articulated by three parts: boom, bucket rod and bucket. In order to meet the needs of various construction operations, hydraulic excavators can be equipped with a variety of working devices, such as excavation, lifting, loading, leveling, clamps, bulldozing, impact hammer, rotary drilling and other operating tools.           

Rotary and traveling device is the body of hydraulic excavator. The upper part of the turntable is equipped with power device and transmission system. Engine is the power source of hydraulic excavator. Most of them use diesel oil in a convenient site, but also can use motor.           

The hydraulic transmission system transmits the power of the engine to the actuators such as the hydraulic motor and cylinder through the hydraulic pump, and promotes the action of the working device, thus completing various operations.


You Might Also Like

Send Inquiry