Reasonable utilization method of bucket tooth of excavator
As people's use of excavators continues to improve, more and more projects are gradually adapting to the existence of this kind of equipment.
However, with the use of excavators, excavator bucket tooth loss is also constantly strengthening, so we usually use excavators when the operation should be able to more effective use of excavator bucket teeth? The importance of excavator bucket teeth is self-evident, so when using should pay more attention, we must take the right measures to carry out, so that the use of excavators will be normal.
So, how does the use of excavator bucket teeth need to be done correctly? Let me introduce you below.
The right choice: the use of excavator bucket teeth is first of all should be the right choice, and the determination of the material is required according to the environment, only in this way to better ensure the correct choice, and the correct choice of the bucket teeth in use can also play the best performance. Angle NOTE: Excavator driver in the operation of mining angle operation should pay attention to, as far as possible to grasp, the bucket teeth when digging perpendicular to the working face, or extroverted inclination is not greater than 120 degrees, to avoid because the inclination is too large and break the bucket teeth.
Also be careful not to swing the digging arm left and right without greater resistance, which will make the bucket tooth and tooth seat due to the left and lower force is too large and break, because most models of bucket teeth mechanical design principle, did not consider the left and right force design.
Timely replacement: The wear of the gear seat is also very important for the service life of the excavator bucket teeth, the tooth seat wear off the 10%--15% after the proposed to replace the tooth seat, because there is a large gap between the worn tooth seat and the bucket teeth, so that the combination of the bucket teeth and the tooth seat, and by the stress changed, the bucket teeth due to the
