Quanzhou Sanqi Engineering Machinery Co.Ltd

enLanguage

There are many reasons for the uneven quality of track shoe

As one of the important parts of the undercarriage of crawler-type construction machinery, the track shoe undertakes the important task of working and walking of the main engine. Although the damage of a single crawler board will not have a significant impact on the work of the main engine, if not replaced in time, the force of other parts such as chains will change and the service life will be shortened. The quality of Caterpillar board varies greatly in the market. When choosing the products with good quality, we can not pursue the low price blindly. Only by choosing the products with good quality, can we ensure the normal work of the main engine and save the trouble of replacing the accessories in the future.

  1. Raw materials, trakck shoe raw materials are 25MnB and 25CrMnB. Raw materials have a great impact on the quality of products. It can be said that the choice of raw materials is the choice of product quality. The first step of crawler plate production is roll pressing. The manufacturer heated the billet to the required temperature and rolled it repeatedly with roll dies. This is the profile of crawler plate. Regular producers will choose the billet production of well-known large steel plants in China to ensure product quality. Small-scale manufacturers will choose irregular or small-scale raw materials because of the high price of large-scale steel plants. The content of metal elements in raw materials with poor quality is not up to the standard and contains too many impurities, which will have a great impact on the quality of products. Therefore, the choice of raw materials has determined 50% of the product quality.           

  2. Heat treatment. Since raw materials determine 50% of the product quality, the other 50% depends on heat treatment. Usually the blank is heated to the required temperature, and then cooled by quenching medium to meet the required hardness and toughness. Track plate is the only part of tracked chassis which adopts full hardening process. The hardness of the core of the product with better quality is 3 to 5 HRC hardness gradients, the core is the lowest, and the tread is the hardest. It is very important to control the process of producing a good product. There are slight differences in the production process of regular manufacturers, but usually the blank is heated to the required temperature and maintained at constant temperature after using quenching medium, which can refine the grain size of the product, make the structure more uniform, and thus obtain reliable hardness and toughness. Small manufacturers usually use simple heating equipment, without temperature control, and directly immerse the blank in water after burning red by visual measurement, so that although a certain degree of hardness can be obtained, there is no quality at all.           

  3. Control of deformation. Deformation of products occurs during heating and quenching. It is a natural reaction of steel in a sudden drop of temperature at high temperature. It is mainly the result of releasing internal stress. Due to the different process and equipment, some manufacturers do not need to correct the deformation after heat treatment, while others need to. There will be no such process in irregular small factories, or simple calibration but the results can not meet the requirements. The crawler plate with high deformation will be damaged first when the main engine is working because of uneven force.


You Might Also Like

Send Inquiry