Usage of the grinding period of the grab wood machine
The advantages of the wood grab machine are the rated load quality, the bucket capacity is high, the unloading height is high, the bucket width is wide, the excavation strength is strong, the wheelbase is big, the wheelbase is big, the ground clearance is small, the whole machine quality is light, the rated power is small, the appearance size is compact. Grab wooden machine streamlined design, elegant appearance. The use of national well-known brand engine, strong power, reliable work, high efficiency and energy saving. Work device automatically flattened, the use of computer optimization design, high efficiency. New sealed cab, Grammer seat, can be equipped with heating and air conditioning, operating environment more comfortable.
Can be equipped with a wooden fork, grab a fork, increase the bucket and so on to meet a variety of working conditions. Due to the influence of the processing, assembly and adjustment of new machine parts such as wood grabbing machine, the friction surface is rough, the contact area of the mating surface is small, and the pressure condition of the surface is uneven. During the operation of the machine, the concave and convex parts of the part surface are embedded with each other friction, and the metal debris that is worn down continues to participate in friction as abrasive, which accelerates the wear of the parts with the surface. Therefore, the grinding period is easy to cause the wear and tear of parts, wear speed is fast.
At this point, if the overload operation, it may cause damage to the component, resulting in an early failure. The grinding period is an important link to ensure the normal operation of the fork wood machine and the fork grass machine, reduce the failure rate and prolong its service life. But at present, some users because of the lack of fork wood machine use common sense or because of tight schedule, or want to get the benefits as soon as possible, ignoring the special technical requirements of the new machine grinding period.
Some users even think that, anyway, manufacturers have repair period, the machine broken by the manufacturers responsible for maintenance, so the machine in the grinding period for a long time overload use, resulting in frequent early machine failure, which not only affected the normal use of the machine, shorten the service life of the machine, but also because of machine damage affected the progress of the project.
