Mini Excavator Front Idler for Yanmar Vio30, Vio35 / USA Seller / Free Shipping

Our Flange Bucket Bushing, Excavator Front Idler, Segments Group D5 D5B D5D is constantly innovating, drawing on the best of others, and combining practical experience to complete a major innovation from product appearance to function. Only by standing in the perspective of customers, can we truly win the market. We have been committed to meet all your needs and solve any technical problems you may encounter with your industrial components. As an experienced manufacturer we also accept customized order and we could make it the same as your picture or sample specification.

Front Idler EX200-1 EX200-3 EX200-5

Product introduction

The structure principle of idler roller is used to support the track and guide the track winding. The roller flange of the idler group clamps the outer edge of the track chain rail joint to prevent the lateral shedding. The track is tightened by the tension buffer device connected with the wheel flange to alleviate the impact from the ground to the frame.

Structure of front idler ex200-1 ex200-3 ex200-5:

Casting of idler roller ex200-1 ex200-3 ex200-5:

Machining of idler group ex200-1 ex200-3 ex200-5:

Advantages of idler assy ex200-1 ex200-3 ex200-5:

Cost saving service life

The heavy profiles of idler roller rims are carefully heat treated in depth for extra service life.

The design of double-cone sealing and lubrication for life makes the carrier roller have long life time and perfect performance under any working condition.

Precision care

Each front idler is precision machined to house special high impact low wear bimetallic bushings.

Factory Advantages:

1). Materials
Our company purchases steel from some large steel groups, such as Shanghai Baoshan Steel Mill, Beijing ShouGang Group, Hangzhou Steel Mill, who provide steel with not only good mechanical properties but stability of chemical component to make sure of the high strength of parts.
2). Manufacture Procession
First, we have already owned High-precision Digital Machining Center for mould making in special Mould Workshop, which decides the high quality of mould. 
Second, heat treatment is utilized. We adopt the Controlled-atmosphere Automatic Heat Treatment Furnace to guarantee the good quality and stability of our parts.
3). The total quality control system
We have established a total quality control system which means we perform quality control from buying raw materials to different machining procession and to final packing. We have many high-tech testing instruments, such as Torsion Tester, Peel Force Tester and Metallographic Microscope and etc. which determine the excellent quality and appearance of our products.

Models of idler assy:

HITACH
UH04-5	UH045-7	UH07-7	UH025	UH025-7	UH081	UH045-5	UH04-3
UH045	UH052	UH053	UH063	UH07-5	UH09-7	UH04-7	UH083
EX20UR-1/2	EX30	EX40-1	EX40-2	EX45-1	EX50UR	EX55	EX60
EX60-2	EX60-3	EX60-5	EX70	EX75	EX90	EX100	EX100M
EX110	EX120-1	EX120-2	EX120-3	EX120-5	EX130-1	EX150	EX270
EX300	EX300-1	EX300-2	EX300-3	EX300-5	EX300A	EX320/321	EX330
EX350	EX370	EX400-1	EX400-2	EX400-3	EX450	EX400-5	EX550
EX700	EX750-5	EX1100	EX35	EX60-1	EX135UR	EX200-1	EX200-2
EX200-3	EX200-5	EX200-6	EX100M-1	EX100M-2
ZAX30	ZAX50	ZAX55	ZAX110	ZAX120	ZAX200	ZAX200-1	ZAX200-2
ZAX200-3	ZAX200-5G	ZAX200LC-3	ZAX210	EX210-3	ZAX210-5	ZAX225	ZAX230
ZAX240	ZAX250	ZAX270	ZAX330	ZAX330C	ZAX350	ZAX360	ZAX450-1
ZAX450-3	ZAX450-5	ZAX210-5G	ZAX330-5G	ZAX220	ZAX230
FH220-3	FH330	FIAT215

FAQ

1. What is the package? Can I print my logo or brand on the package?

The normal package is below:

Honed tubes package: oilded and capped on tub end. PE sheet bundles wrapped package or as per request.

Chrome plated bars package: oiled and protected by hardboard sleeves, then in seaworty wooden case.

Hydaulic cylinder package: wrapped by PE film and packed in strong wooden case.

Logo or marking will be as per customer’s request.

mdom when parts are being machined or assembled. All of these can guarantee the parts with correct sizes and good quality.

2. What is the percent of your parts for overseas market?

70percent of our parts are for overseas market.

3. Is there any guarantee of your parts?

There are 6 months guarantee time for excacavar parts under normal working conditions and 3months guaranteet tiem for bulldozer parts under normal working conditions.

4. How do you offer guarantee?

If parts are broken due to manufacturing problem, we will deduct the value for next order amount or offer you brand new one to replce.

Competitive Price for Mini Excavator Front Idler for Yanmar Vio30, Vio35 / USA Seller / Free Shipping. For many years, our company pursues the enterprise tenet of 'survival by quality and development by reputation', and adheres to the development consciousness of 'ranking top in quality, ranking in users and ranking in good faith'. We can design, develop and manufacture the products according to the requirements of customers, so as to make the customers satisfied.

Hot Tags: front idler ex200-1 ex200-3 ex200-5, China, best, manufacturers, suppliers, factory, front idler bearing, small nut, Crawler Crane Idler, carrier roller for filtration systems, Sprocket Rim EX40, Carrier Roller MS110 5 MS120 8