Sk15sr Mini Excavator Final Drive Sk15 Sk015 Travel Motor S19031-12400
Before assembling rollers,smooth the sharp part of sapre parts and do the deburring,clean the inner holes of the roller body and oil seal etc..
Product Introduction
We continue to shorten the product development cycle, reduce the cost of product development, significantly improve the quality and performance of Front Idler SK60-3, JCB Track Roller, Bulldozer Track Shoe, improve our own brand, and enhance our ability of independent research and development. We continue to expand business areas, enhance profitability, and expand the scale and influence of international and domestic markets. We use high-quality craftsmanship to ensure premium products, regard the needs of users as an enterprising goal, serve customers sincerely, and wholeheartedly meet the demands of our customers.
Mini excavator track roller
Sizes
| SPECIFICATIONS FOR mINI CRAWLER EXCAVATOR TRACK ROLLER | ||
| Structure | wheel body | 35MnB/40Mn2/40MnB/50Mn |
| side cover | QT500-7 | |
| shaft | 45# | |
| ring float | GLKBTCr16Mo2NiCu | |
| O ring | rubber | |
| Bimetal sleeve | CuPb10Sn10 | |
| Hexagon socket bolt | JB/T1000-1977 | |
| lubricating oil | 40# | |
| The main parameters | Model name | SK045 MINI |
| Part number | ||
| Color | Black or Yellow | |
| Surface Hardness | HRC48-54,deepth:4mm-10mm | |
| Technique | Forging&Casting | |
| Warranty time | 6months | |
| Certification | ISO9001-9002 | |
| Delivery Time | Within 30 days after contract established | |
| Package | Fumigate seaworthy packing | |
Attentions while assembling the rubber bottom rollers
1. Before assembling rollers,smooth the sharp part of sapre parts and do the deburring,clean the inner holes of the roller body and oil seal etc..
2. Do not break and scratch any part of the sealing parts.
3. Do not oil and distort the rubber floating seal ring during assembling the rollers.
4. A small amount of oil should be covered on the contacting surface while fitting the floating seal group.
5. After finishing the assembling process,fill clean extreme-pressure vehicle gear oil to take 80 percent of the inner cavity of roller body and do the running test then confirm no leakage after 4 hours.
| MODELS OF MINI TRACK ROLLER AVAILABLE FORM US | ||
| PC05/PC07 | SK045SR | CX50/55 |
| PC10-7 | SK024/SK025 | TB015 |
| PC12/15R | SK030 | TB016 |
| PC18MR | SK042-1 | TB068 |
| PC20-3 | SK042-2 | TB125 |
| PC20-7 | SK045-1 | TB135 |
| PC30-2 | SK045-2 | TB140 |
| PC30-6 | SK60-3 | TB145 |
| PC35 | SK60-5 | TB150 |
| PC20/30(rubber） | SK60-8 | TB175 |
| PC20R-8 | SK75 | KH025 |
| PC30MR-1 | SK45SR-3 | U10-3 |
| PC38UU | SK50SR-3 | U15-3 |
| PC40-5 | SK70SR | U17-3 |
| PC40-6 | SK135SR | U20-2/3 |
| PC40-7 | SH30 | U30-2/3 |
| PC45 | SH55 | U40-2/3 |
| PC40MR-2 | SH60 | U50-3 |
| PC50MR-2 | SH65 | U60 |
| PC50 | SH75 | U80/U85 |
| PC56-7 | VIO15-1 | K030 |
| PC60-5 | VIO15-2 | K040 |
| PC60-7 | VIO20-1 | K045 |
| PC75UU-2/3 | VIO20-2 | H30 |
| EX08 | VIO30-1 | H40 |
| EX12/EX15 | VIO30-2 | H45 |
| EX20/EX22 | VIO35 | KX36 |
| EX25/EX30 | VIO40-2 | KX41-3 |
| UE30 | VIO50/55 | KX61 |
| EX35 | VIO60 | KX91-3 |
| EX40-1 | VIO70 | KH90 |
| EX40-2 | VIO75 | KX101/KH101 |
| AX40U-2 | VIO80 | KX121 |
| AX40U-3 | B19/B19-3 | KX135 |
| AX40U-4 | B27-3 | KX155 |
| EX45 | B37-2 | KX161 |
| EX50 | B50 | KX185 |
| ZX30U | B70 | DH35 |
| ZX40 | IHI18J | DH55 |
| ZX50 | IHI25J | DH80 |
| EX55 | IHI30J | DX60 |
| EX60-1 | IHI35J | HD140 |
| EX60-2/3 | IHI45J | HD250 |
| EX60-5 | IHI50J | Bobcat320 |
| CAT301 | IHI55J | Bobcat425 |
| CAT301.8 | IHI30NX | Bobcat322 |
| CAT302.5 | IHI35NX | Bobcat325 |
| CAT303/304 | IHI45NX | Bobcat331 |
| E30 | IHI50NX | Bobcat337 |
| E45 | IHI55NX | SEW30 |
| E305 | IHI60NX | SEW50 |
| E304CR | IHI65NX | SEW70 |
| E305MR | IHI40G | SEW90 |
| E305.5 | IHI50G | MS30 |
| E307/E308 | IHI80J | MS40 |
| E70B | MM30 | MS070B |
| SK15 | MM35B | EC15/20 |
| SK015SR | MM45T | EC25 |
| SK020 | MM45B | EC30 |
| SK020SR | MM55SR | EC55 |
| SK035SR | ||
FAQ
1. How do you offer guarantee?
If parts are broken due to manufacturing problem, we will deduct the value for next order amount or offer you brand new one to replce.
2. Could you make customer logo?
Yes,we can make customer logos if it reach the moq for customer logo order.
3. If we don’t have drawings, could we develop a new item?
Yes, you can offer us the main dimension. Then we can compare with our ready products and make a drawing for your checking.
4. Could we be your exclusive dealer?
Yes,our policy is that we will not let our customer to compete at the same place.
5. If we don't find what we want on your website, what should we do?
You can email us the descriptions and pictures of the products you need,we will check whether we have them. We develop new items every month, and some of them have not been uploaded to website in time. Or you can send us sample by express,we will develop this item for bulk purchasing.
Our Sk15sr Mini Excavator Final Drive Sk15 Sk015 Travel Motor S19031-12400 do have good quality and excellent performance, and each of them is strictly inspected. We hope to produce positive social influence, maximize the brand value and realize the sustainable and long-term development of the enterprise. We take the pursuit of operating profit growth as our goal, and we are also committed to seeking a win-win situation between the company and society.
Hot Tags: Mini Excavator Track Roller SK045 MINI, China, best, manufacturers, suppliers, factory, spare nut, copper bolt, distribution handle bucket, Track Roller Single Flange, Front Idler ZAX200 5G, dozer cutting edges for sale
You Might Also Like
Send Inquiry