Quanzhou Sanqi Engineering Machinery Co.Ltd

enLanguage
172478-37501 Excavator Upper Roller

172478-37501 Excavator Upper Roller

The carrier roller group is used to hold the track upward so that the track has a certain degree of tension.

Product Introduction

172478-37501 excavator upper roller

Production description

An excavator upper roller is an essential component of an excavator machine. It is a part of the undercarriage system and is located at the top of the track frame. The roller is responsible for guiding the excavator in a stable and smooth manner during operation.

 

Quick detail:

Origin:

Fujian,China

Brand

SQ, GTR

Model:

172478-37501 excavator upper roller

Hardness of trail surface

HRC52-58

Color

Yellow, black, gray

Roller body material

50MN

Delivery time

20-45days

Warranty time

6 months

Name

upper roller group

Machine type

Crawler tracked excavator

 

Technical requirements:

1. Before installation, remove the slag on the surface of each part and clean it

2. Install the floating oil seal ring correctly. The surface is coated with pure oil film, and the O-ring shall not be twisted or skewed

3. The assembly must pass the sealing test without air leakage under the pressure of 0.6MPa

4. Each filling hole must be filled with diesel engine oil ecc40

5. After 6 minutes running in test, the manually rotating wheel body shall be light without jamming

6. Degrease the outer surface and spray two coats of antirust paint

 

Sizes of 172478-37501 excavator upper roller

 

详情图 2 carrier roller group

 

Structure of 172478-37501 excavator upper roller

 

详情图 3 upper roller group


 

Our factory in Quanzhou city, Fujian, China

 

详情图 4 top roller group

FAQ

1.How To Ensure The Goods Is Available For My Machine?

We have the service information system which can check the machine parts information precisely. If you can't ensure the model or you need customized goods, you can measure the parameter and then we will find that.

2. How Do You Make Your Parts Suitable For Overseas Market?

Our R&D centerhas labs for track undercarriage and centers for product analysis, trial, with a complete system for new products confirmation.
Our center adopts international advanced three- dimensional and simulation software to integrate development, design, technology and manufacture. Meanwhile, our corporate dispatch many technical managers for deep study abroad to make full preparation for building international corporation.

3. What Is The Percent Of Your Parts For Overseas Market?

70percent of our parts are for overseas market.

 

 

Hot Tags: 172478-37501 excavator upper roller, China, best, manufacturers, suppliers, factory, Track Roller PC75UU, Front Idler PC200 5 PC200 6, Front Idler R290, Track Roller SH300 For SUMITOMO, Sprocket Rim JS140, Sprocket Rim PC200 5 PC200 6 PC200 7 PC200 8

You Might Also Like

(0/10)

clearall