Quanzhou Sanqi Engineering Machinery Co.Ltd

enLanguage
Carrier Roller EX100 EX120

Carrier Roller EX100 EX120

Hardness:HRC52-58
Material:50MN
Machine type:Crawler tracked type

Product Introduction

Carrier Roller EX100 EX120

Production Introduction:

The carrier roller also called top roller and upper roller is to hold the track upward, so that the track has a certain degree of tension.

technical requirement of top roller ex100 ex120

1. All parts shall be cleaned before assembly without any sundries;

2. Apply a small amount of clean oil to the grinding surface of the floating seal ring; ensure the axial direction after assembly

The displacement is 0.3-0.6 mm

3. Carry out the pressure test before oil injection, and there is no air leakage under the pressure of 0.5-0.6mpa;

4. After installation, inject clean sae80w-90 gear oil (the oil volume accounts for about the cavity

90% ~ 95% of the volume;

5. Run it in for 3-5 minutes after refueling to make it operate smoothly;

6. After the surface is clean, spray two coats of antirust paint.


CARRIER ROLLER EX100 EX120

Advantages:

1. Each top roller shell is carefully heat treated to ensure long wear life and stress resistance.

2. Differential type of quenching or through type of quenching heattreatment can ensure certain heat treatment hardness depth and so give good anti-cracking effects.

3. Warm forging treated roller shell gains distinguishing inner material fiber flow distribution architecture.

heattreatment 4

Models of carrier roller assy of hitachi excavtors:

EX100-1EX100-2EX100-3EX100EX100M-2EX100M-3EX100M-5EX110
EX120-1EX120-5EX120-6EX130H-5EX135EX150EX150LCEX160LC-5
EX180EX200-1EX200-2EX200-3EX200-5EX200H-3EX200K-2EX200LC-3
EX200LC-5EX200LCH-3EX200LCK-2EX200LC-3EX200LC-5EX200LCH-3EX200LCK-2EX210H-5
EX215EX215EEX215LCEX220-2EX220-3EX220LC-1EX220LC-2EX220LC-3
EX220LC-5EX267EX270-5EX270LCEX270LC-2EX270LC-5EX285EX285LC
EX300-1EX300-2EX300-5EX300H-1EX300H-2EX300H-3EX300LC-1EX300LC-2
EX300LC-3EX300LC-5EX300LCH-2EX300LCH-3EX310H-3CEX350EX400-1EX400-2
EX400-5EX400H-3EX400HLCEX400LC-1EX400LC-2EX400LC-3EX400LCH-3EX450-5
EX450LC-5EX550EX550-3EX550HEX550LCEX550LC-3EX550LCHEX600H
EX600H-3EX600LCHEX700-2EX700BE-1EX700H-1EX750-5EX75UEX80-5
EX800H-5EX80LC-5EX135UEX135VR











UH025-5UH025-7UH035UH035-7UH03MUH04-1UH04-2UH04-3
UH041UH042UH043UH045-5UH045-7UH04M-1UH04M-2UH04M-5
UH051UH052MUH053UH06-5UH061UH062UH063UH07-3
UH07-5UH07-7UH07LC-5UH081UH081LCUH082UH082LCUH083
UH083LCUH09-7UH09LC-7UH10UH10-2UH101UH10LC-2UH12
UH12-7UH121UH122LCUH123UH12LCUH12LC-7UH14-2UH14-3
UH14LC-2UH171UH171LCUH172UH172LCUH181UH20UH35
UH501







FAQ

1. What Is MOQ For The Order?

Generally speaking, the MOQ is a full container load of 20 feet container. Under this condition, the single cost can be lowered. if customers ask for less full container load. It is also acceptable.

2. If We Don't Find What We Want On Your Website, What Should We Do?
You can email us the descriptions and pictures of the products you need,we will check whether we have them. We develop new items every month, and some of them have not been uploaded to website in time. Or you can send us sample by express,we will develop this item for bulk purchasing.

3. What Is The Percent Of Your Parts For Overseas Market?

70percent of our parts are for overseas market.

4. Is There Any Guarantee Of Your Parts?

There are 6 months guarantee time for excacavar parts under normal working conditions and 3months guaranteet tiem for bulldozer parts under normal working conditions.

UPPER ROLLER EX100 EX120



Hot Tags: carrier roller ex100 ex120, China, best, manufacturers, suppliers, factory, Excavator Carrier Roller Group, Undercarriage Parts, Track Guard, Top Roller For Cranes, Carrier Roller E320, Carrier Roller DH220 DH220 5 DH220 7 DH220 9

You Might Also Like

(0/10)

clearall