
Carrier Roller EX400-1
Hardness:HRC52-58
Material:50MN
Machine type:Crawler tracked type
Product Introduction
Carrier Roller EX400-1
Production Introduction:
The carrier roller is to hold the track upward, so that the track has a certain degree of tension.
Technical Requirements Of Top Roller EX400-1
1. Remove sharp corners and burrs of parts before assembly. And clean the bore, oil seal and other parts inside the wheel.
2. Parts such as floating oil seal shall not be scratched or bruised.
3. The floating oil seal rubber ring shall not be stained with oil or twisted during assembly.
Advantages:1.Each top rollers shaft is machined by the utilization of the most modern technological advances known to the industry, Grinding and finishing methods ensure mirror like finish and tempering with medium to low frequency heat treating equipment guarantees maximum strength.
2.Each mini excavator upper rollers is precision machined to house special high impact low wear bimetal bushings.
3.Lubrication oil of our bulldozer top rollers is selected carefully. It can lubricate shaft and bushing well to lower the wearing utmostly. And it can cool the roller perfectly. Those maximize the inner structure life.
CARRIER ROLLER EX400-1

Models of carrier roller group of hitachi excavators:
| EX100-1 | EX100-2 | EX100-3 | EX100 | EX100M-2 | EX100M-3 | EX100M-5 | EX110 |
| EX120-1 | EX120-5 | EX120-6 | EX130H-5 | EX135 | EX150 | EX150LC | EX160LC-5 |
| EX180 | EX200-1 | EX200-2 | EX200-3 | EX200-5 | EX200H-3 | EX200K-2 | EX200LC-3 |
| EX200LC-5 | EX200LCH-3 | EX200LCK-2 | EX200LC-3 | EX200LC-5 | EX200LCH-3 | EX200LCK-2 | EX210H-5 |
| EX215 | EX215E | EX215LC | EX220-2 | EX220-3 | EX220LC-1 | EX220LC-2 | EX220LC-3 |
| EX220LC-5 | EX267 | EX270-5 | EX270LC | EX270LC-2 | EX270LC-5 | EX285 | EX285LC |
| EX300-1 | EX300-2 | EX300-5 | EX300H-1 | EX300H-2 | EX300H-3 | EX300LC-1 | EX300LC-2 |
| EX300LC-3 | EX300LC-5 | EX300LCH-2 | EX300LCH-3 | EX310H-3C | EX350 | EX400-1 | EX400-2 |
| EX400-5 | EX400H-3 | EX400HLC | EX400LC-1 | EX400LC-2 | EX400LC-3 | EX400LCH-3 | EX450-5 |
| EX450LC-5 | EX550 | EX550-3 | EX550H | EX550LC | EX550LC-3 | EX550LCH | EX600H |
| EX600H-3 | EX600LCH | EX700-2 | EX700BE-1 | EX700H-1 | EX750-5 | EX75U | EX80-5 |
| EX800H-5 | EX80LC-5 | EX135U | EX135VR |
FAQ
1. What Is MOQ For The Order?
Generally speaking, the MOQ is a full container load of 20 feet container. Under this condition, the single cost can be lowered. if customers ask for less full container load. It is also acceptable.
2. What’s The Qualify Assurance We Provided And How Do We Control Quality?
1). Established a procedure to check products at all stages of the manufacturing process from raw materials to final products. Beside, we have also developed a procedure which identifies the inspection and test status of all items at all stages of the manufacturing process.
2).100% inspection in assembly lines. All controls, inspections,equipment,fixtures,total production resources and skills are inspected to ensure they consistently achieve the required quality levels.
3. What Is The Percent Of Your Parts For Overseas Market?
70percent of our parts are for overseas market.
4. Is There Any Guarantee Of Your Parts?
There are 6 months guarantee time for excacavar parts under normal working conditions and 3months guaranteet tiem for bulldozer parts under normal working conditions.
UPPER ROLLE EX400-1
Hot Tags: carrier roller ex400-1, China, best, manufacturers, suppliers, factory, Excavator Carrier Roller Group, Carrier Roller EX200 2, Carrier Roller MS110 5 MS120 8, Carrier Roller PC1250, Big Excavator Carrier Roller, Carrier Roller JS200
You Might Also Like
Send Inquiry







