D95S-2 BULLDOZER CARRIER ROLLER

D95S-2 BULLDOZER CARRIER ROLLER

Production Introduction:

The carrier roller also called top roller and upper roller is to hold the track upward, so that the track has a certain degree of tension.

Advantages of D95S-2 BULLDOZER CARRIER ROLLER

1. Warm forging treated roller shell gains distinguishing inner material fiber flow distribution architecture.

2.Each top rollers shaft is machined by the utilization of the most modern technological advances known to the industry, Grinding and finishing methods ensure mirror like finish and tempering with medium to low frequency heat treating equipment guarantees maximum strength.

3.Each mini excavator upper rollers is precision machined to house special high impact low wear bimetal bushings.

Technical requirement

1. Before assembly, all parts shall be thoroughly deburred and cleaned;

2. The floating seal ring and the floating seal rubber ring shall be degreased and dried;

3. During assembly, a small amount of lubricating oil shall be applied to the working faces of the two floating seal rings;

4. The assembly shall rotate flexibly without jamming;

5. Pressure test for 1 minute, pressure 0.8MPa, no air leakage is allowed;

6. Inject 110 ml of 22 hyperbolic gear oil after pressure test;

7. The hardness HRC52-58

Applicable To Models:

D75S-3,D75S-5,D80A-18,D80E-18,D80F-18,D80P-18,D83E-1,D83P-1,D85A-18,D85A-21,D85E-18,D85E-21,D85P-18,D85P-21,D95S-1,D95S-2 ETC..

FAQ

1. Could you make customer logo?

Yes,we can make customer logos if it reach the moq for customer logo order.

2. If we don't have drawings, could we develop a new item?

Yes, you can offer us the main dimension. Then we can compare with our ready products and make a drawing for your checking.

3. Could we be your exclusive dealer?

Yes,our policy is that we will not let our customer to compete at the same place.

Hot Tags: d95s-2 bulldozer carrier roller, China, best, manufacturers, suppliers, factory, Komatsu Carrier Roller, Top Carrier Roller, carrier roller pc100 3 pc120 3 pc100 5 pc120 5, Carrier Roller EX200 2, Carrier Roller PC60 5 PC60 6, Carrier Roller MS110 5 MS120 8