Quanzhou Sanqi Engineering Machinery Co.Ltd

enLanguage
VIO50CR Excavator Carrier Roller

VIO50CR Excavator Carrier Roller

The carrier roller group is used to hold the track upward so that the track has a certain degree of tension.

Product Introduction

VIO50CR excavator carrier roller

Production description

The carrier roller group is used to hold the track upward so that the track has a certain degree of tension.

And we offer a wide range of excavator top roller group for the most popular models.our rollers are engineered with forged alloy steel which is through a proper heat treatment allowing durability and impact. Our rolles are highly praised in the market as a product with impact resistance and a long life

 

Quick detail:

Origin:

Fujian,China

Brand

SQ, GTR

Model:

VIO50CR excavator carrier roller

Hardness of trail surface

HRC52-58

Color

Yellow, black, gray

Roller body material

50MN

Delivery time

20-45days

Warranty time

6 months

Name

upper roller group

Machine type

Crawler tracked excavator

 

Supply ability

We can manufacture around 300000pcs of track rollers and carrier rollers one month.

 

Packing and shipping

 

Generally speaking, we use 20gp container to load the goods. And It can load from 22tons to 28tons. It is up to customer's requirements.

But some time, customer will take 40 feet container.because there is no a big difference at the fee between 20 feet and 40 feet container in their side.

And there are two seaports available Xiamen and quanzhou.

 

 

Packing

9pcs per pallet,several pallets as a pile up to the weight around 3t

12pcs per pallet, several pallets as a pile up to the weight around 3t

15pcs per pallet, several pallets as a pile up to the weight around 3t

20pcs per pallet, several pallets as a pile up to the weight around 3t

 

详情图 1  excavator carrier roller group

Technical requirement

1. Check all parts strictly before assembly and clean them

2. A small amount of oil shall be applied to the mating surface of the shaft sleeve and straight shaft before assembly

3. The floating oil seal ring shall be assembled in pairs, and its sealing surface shall be coated with lubricating oil. O-ring and floating oil seal ring

The contact surface shall not be coated with grease, and the assembly of floating seal rubber ring shall not be twisted

4. During assembly, pay attention to the oil groove direction of the shaft and the installation plane of the side cover

5. After assembly, ensure that the axial clearance is 0.4-0.7mm. Rotate the wheel body by hand, and feel the resistance moment, but there is no jamming,

6. After installation, fill in the filtered lubricating oil and check that there is no leakage. Then run in for 3-5 minutes to make it run smoothly

7. The painting color shall comply with jb2299-78 or the customer's requirements

 

Sizes of VIO50CR excavator carrier roller

 

详情图 2 carrier roller group

 

Structure of VIO50CR excavator carrier roller

 

详情图 3 upper roller group

 

interchangable models:

B5,B50,B50.1,B50.2,B50.2A,VIO50,VIO50CR,VIO50PR,VIO70,VIO70A,VIO75,VIO75A,VIO75V

 

 

详情图 4 top roller group

FAQ

1. How About The Payment Terms?

TT 30 percent deposit,and TT 70percent balance after seeing the scan copy of bill of lading or LC at sight.

2. How Can You Control Your Quality?

When material come inside our factory, we need to analyze the material cost. And when front idlers and sprocket rims material are casted. We need to analyze the composition to see if the material is qualified or not. When track rollers, carrier rollers and front idlers are being assembled, we need to oil leakage testing. After several parts are heat treated, we need to check the hardness before all are done.And our inspectors will check the sizes at ramdom when parts are being machined or assembled. All of these can guarantee the parts with correct sizes and good quality.

3. How Do You Offer Guarantee?

If parts are broken due to manufacturing problem, we will deduct the value for next order amount or offer you brand new one to replce.

4. Could We Be Your Exclusive Dealer?

Yes,our policy is that we will not let our customer to compete at the same place.

 

 

Hot Tags: vio50cr excavator carrier roller, China, best, manufacturers, suppliers, factory, Front Idler MS120 8, Grader Side Cutter, Front Idler PC650 8, EX60 Track Roller, Sprocket Rim SH280, KTM Track Roller

You Might Also Like

(0/10)

clearall