
VIO55-6 EXCAVATOR UPPER ROLLER
It is used to hold the track upward so that the track has a certain degree of tension.
Product Introduction
VIO55-6 EXCAVATOR UPPER ROLLER
Production description
An excavator upper roller is an important component on an excavator. This roller is located at the top of the excavator and plays a vital role in ensuring that the machine runs smoothly. These rollers are designed to provide support and stability for the excavator's track chains, preventing the chain from coming off while the machine is in use.
The upper roller is made up of durable materials that can withstand the weight and pressure of the machine. It is also designed to disperse the weight of the excavator, helping to prevent damage to the track chains and other parts.
When it comes to excavator maintenance, it is important to check the upper roller periodically. This will help to ensure that it is in good working condition and able to support the excavator's weight. Regular maintenance can also help to extend the life of the roller, saving time and money in the long run.
In conclusion, an excavator upper roller is a crucial component of any excavator. It plays a key role in ensuring that the machine runs smoothly, and it is important to take care of it through regular maintenance. By doing so, we can prolong the life of this important component and ensure that our excavators continue to function properly for years to come.
Sizes of VIO55-6 EXCAVATOR UPPER ROLLER

Structure of VIO55-6 EXCAVATOR UPPER ROLLER

Supply ability
We can manufacture around 25000pcs of track carrier rollers one month.
Other more detailed information of mini excavator upper rollers:
|
Model |
VIO55-6 EXCAVATOR UPPER ROLLER |
|
Machine weight range |
1.5t to 95.3t |
|
Applicable pitch range |
90 to 317.5 |
|
Packing |
Polywood pallets,fumigated wooden pallets,wooden case |
|
Port of shipment |
Xiamen,Quanzhou ,China |
|
guarantee time |
6 months |
|
OEM and ODM |
Acceptable |
|
Payment term |
TT 30percent as deposit,TT 70 percent balance after receipt the scan copy of bill of lading |
| LC at sight |
Technical requirement
1. All parts shall be cleaned before assembly without any sundries;
2. Apply a small amount of clean oil to the grinding surface of the floating seal ring; ensure the axial direction after assembly
The displacement is 0.3-0.6 mm
3. Carry out the pressure test before oil injection, and there is no air leakage under the pressure of 0.5-0.6mpa;
4. After installation, inject clean sae80w-90 gear oil (the oil volume accounts for about the cavity
90% ~ 95% of the volume;
5. Run it in for 3-5 minutes after refueling to make it operate smoothly;
6. After the surface is clean, spray two coats of antirust paint.
FAQ
1. Are You A Manufacturer Or A Trader?
We are a manufacturer. We do forging and casting by ourselves. And our factory is located in Quanzhou city, Fujina, China.
2. How Can I Be Sure The Part Will Fit My Excavator?
Give us correct model number/machine serial number/ any numbers on the parts itself. Or measure the parts give us dimension or drawing.
3. What Is The Package? Can I Print My Logo Or Brand On The Package?
The normal package is below:
Honed tubes package: oilded and capped on tub end. PE sheet bundles wrapped package or as per request.
Chrome plated bars package: oiled and protected by hardboard sleeves, then in seaworty wooden case.
Hydaulic cylinder package: wrapped by PE film and packed in strong wooden case.
Logo or marking will be as per customer's request.
Hot Tags: vio55-6 excavator upper roller, China, best, manufacturers, suppliers, factory, Track Roller Berco, Track Link EX200 2 EX200 3 EX200 5, Mini Track Roller U20, Track Roller EC210B For Volvo, Idler For VOLVO EC210B, Track Roller R130
You Might Also Like
Send Inquiry







