
Vio70cr Excavator Carrier Roller
Single flange upper roller group and double flange upper roller group is applicable to special model of crawler-tracked excavators and bulldozers from 1.5ton to 95.3ton . It is widely applied in excavators and bulldozers like komatsu, hitachi, kobelco, Hyundai, volve,Kubota,yanmar etc.
Product Introduction
vio70cr excavator carrier roller
Product introduction
The excavator carrier roller group is used to hold the track upward so that the track has a certain degree of tension.
Single flange upper roller group and double flange upper roller group is applicable to special model of crawler-tracked excavators and bulldozers from 1.5ton to 95.3ton . It is widely applied in excavators and bulldozers like komatsu, hitachi, kobelco, Hyundai, volve,Kubota,yanmar etc..
Sizes of vio70cr excavator carrier roller

Quick detail:
|
Origin: |
Fujian,China |
Brand |
SQ, GTR |
|
Model: |
vio70cr excavator carrier roller |
Hardness of trail surface |
HRC52-58 |
|
Color |
Yellow, black, gray |
Roller body material |
50MN,40Mn2,45# |
|
Delivery time |
20-45days |
Warranty time |
6 months |
|
Name |
excavator carrier roller |
Machine type |
Crawler tracked bulldozer |
Technical requirement
1. Check all parts strictly before assembly and clean them
2. A small amount of oil shall be applied to the mating surface of the shaft sleeve and straight shaft before assembly
3. The floating oil seal ring shall be assembled in pairs, and its sealing surface shall be coated with lubricating oil. The contact surface between O-ring and floating oil seal ring shall not be coated with lubricating grease, and the assembly of floating seal rubber ring shall not be twisted
4. The total assembly force of the floating seal ring shall be 45-50kgf. M, so as to ensure the axial clearance of 0.4-0.9mm after assembly. When turning the wheel body by hand, there is a certain resistance moment, but no jamming
5. After installation, fill in the filtered lubricating oil. The tightening torque of the oil plug is 20 ± 2kgf. M. no leakage is allowed during the inspection
6. The painting color shall comply with jb2299-78
Our factory in quanzhou city, Fujian, china
Our factory is located in Quanzhou city which is the cultural capital of east asia, the starting point of the silk road at sea.
We are professional manufacturer of undercarriage parts and other related parts of crawler tracked machinery. Our products include track roller, upper roller group for bulldozer, sprocket rim, front idler, track link ,track guard, track adjuster, boom cylinder assy, arm cylinder assy, bucket cylinder assy, bucket bushing, bucket pin, track bolt nuts, forging bucket teeth, bucket link, bucket side link, cutting edge and side cutters etc.. they are applicable for world famous brands and Chinese domestic brands like komatsu, hitachi, kobelco, kato, mitusbishi, Kubota, yanmar,Hyundai, doosan,Volvo, case, jcb, sany, xugong, liugong,zoomlion sunward etc..

interchangable models:
B5,B50,B50.1,B50.2,B50.2A,VIO50,VIO50CR,VIO50PR,VIO70,VIO70A,VIO75,VIO75A,VIO75V
FAQ
1. What is the percent of your parts for overseas market?
70percent of our parts are for overseas market.
2. Is there any guarantee of your parts?
There are 6 months guarantee time for excacavar parts under normal working conditions and 3months guaranteet tiem for bulldozer parts under normal working conditions.
3. Could we be your exclusive dealer?
Yes,our policy is that we will not let our customer to compete at the same place.
4. what is your advantage which is different from others?
We have forging and casting workshops so our prices are more competitive than others.
5. How about the payment terms?
TT 30 percent deposit,and TT 70percent balance after seeing the scan copy of bill of lading or LC at sight.
Hot Tags: vio70cr excavator carrier roller, China, best, manufacturers, suppliers, factory, Yanmar Carrier Roller, Idler For CATERPILLAR E330, Sprocket Rim PC200 5 PC200 6 PC200 7 PC200 8, Track Link EC360 EC460, Front Idler PC200 5 PC200 6, Carrier Roller DH220
You Might Also Like
Send Inquiry







