Quanzhou Sanqi Engineering Machinery Co.Ltd

enLanguage
9134295 Excavator Idler

9134295 Excavator Idler

Hardness:HRC48-HRC56
Guarantee:6months
Machine types:crawler tracked excavator

Product Introduction

9134295 excavator idler

Production introduction:

An idler of a crawler tracked machinery is an essential component that supports the weight of the machine and maintains the tension of the track. It is located between the sprocket and the track roller and guides the track around the undercarriage. The idler is important because it minimizes the stress and wear on the undercarriage components.

 

Structure of 9134295 excavator idler:

FRONT IDLER

 

More knowledge of 9134295 excavator idler:

The guide wheel is used to guide the track to rotate correctly to prevent its deviation and derailment.            

Most excavators also act as supporting wheels. This can increase the contact area between the track and the ground and reduce the grounding voltage.            

The wheel surface of the guide wheel is made into a smooth surface, and the middle arm ring acts as the guide, while the torus on both sides supports the rail chain.            

The smaller the distance between the guide wheel and the nearest supporting wheel, the better the guidance.         

Material: ZG50MN, casting, tempering, hardness HRC48-HRC56           

Main points:            

In order to make the guide wheel work and prolong its life, the radial runout of the wheel face on the central hole should be less than or equal to 3MM, and the correct alignment should be made when the wheel is installed.

 

front idler casting

EX400-5 TRACK ROLER PART NUMBER:9129347

EX400-5 CARRIER ROLER PART NUMBER:4349516

EX400-5 SPROCKET PART NUMBER:1010956

EX400-5 IDLER GROUP PART NUMBER:9134295

EX400-5 TRACK LINK PART NUMBER:9133225 49L

 

               
               
               

IDLER ROLLER

FAQ

1. Could We Be Your Exclusive Dealer?

Yes,our policy is that we will not let our customer to compete at the same place.

2. Are You A Manufacturer Or A Trader?

We are a manufacturer. We do forging and casting by ourselves. And our factory is located in Quanzhou city, Fujina, China.

3. How About The Payment Terms?

TT 30 percent deposit,and TT 70percent balance after seeing the scan copy of bill of lading or LC at sight.

 

Hot Tags: 9134295 excavator idler, China, best, manufacturers, suppliers, factory, Front Idler D155 5, Front Idler PC200 7, Front Idler ZAX210 ZAX230 ZAX240, Front Idler IS45, Front Idler U15, Front Idler ZAX870

You Might Also Like

(0/10)

clearall