Quanzhou Sanqi Engineering Machinery Co.Ltd

enLanguage
SK030SR Excavator Idler

SK030SR Excavator Idler

Machine type:Crawler tracked excavator
Material:ZG50MN
Guarantee:6months

Product Introduction

SK030SR excavator idler

Production introduction

We offer a wide range of idler for the most popular models.our excavator idler assy are engineered with casting alloy steel which is through a proper heat treatment allowing durability and impact. Our excavator idler groups are highly praised in the market as a product with impact resistance and a long life.

Structure of front SK030SR excavator idler:

FRONT IDLER

Heattreatment of SK030SR excavator idler:

front idler casting

Machining of SK030SR excavator idler:

IDLER ROLLER MACHINING WORKSHOP

 

 

Attentions while assembling the idler rollers

1. Before assembling rollers,smooth the sharp part of sapre parts and do the deburring,clean the inner holes of the roller body and oil seal etc..

2. Do not break and scratch any part of the sealing parts.

3. Do not oil and distort the rubber floating seal ring during assembling the rollers.

4. A small amount of oil should be covered on the contacting surface while fitting the floating seal group.

5. After finishing the assembling process,fill clean extreme-pressure vehicle gear oil to take 80 percent of the inner cavity of roller body and do the running test then confirm no leakage after 4 hours.

MODELS AVAILABLE FOR KOBELCO MACHINERY

SK15,SK024,SK025,SK030SR,SK35,SK35SR,SK042,SK045,SK405SR,SK50P,SK60-8,SK60-3,SK75,SK100-3,SK120-3,SK120-5,SK135,SK140,SK07N2,SK07-2,SK220,SK200-3,5,8,SK320,SK330-8,SK350-8,SK450,SK460 ETC..

 

FAQ

1. Is There Any Guarantee Of Your Parts?

There are 6 months guarantee time for excacavar parts under normal working conditions and 3months guaranteet tiem for bulldozer parts under normal working conditions.

2. Could You Make Customer Logo?

Yes,we can make customer logos if it reach the moq for customer logo order.

3. Could We Be Your Exclusive Dealer?

Yes,our policy is that we will not let our customer to compete at the same place.

4. What is your minimum order?

It depends on what you are buying. Normally, our minimum order is USD5000. one 20' full container and LCL container (less than a container load) can be acceptable.

5. What is your delivery time?

FOB Xiamen or any Chinese port : 35-45 days . If there are any parts in stock , our delivery time is only7-10 days.

6. What about Quality Control?

We have a perfect QC system for the perfect products. A team who will detect the product quality and specification piece carefully, monitoring every production process until packing is complete, to ensure product safety into container.

 

Hot Tags: sk030sr excavator idler, China, best, manufacturers, suppliers, factory, Front Idler D5H, Idler For HYUNDAI R60 5, Front Idler EX100 1 EX120 1, Idler For KOMATSU PC200 1, FronT Idler D60 8 D65 8, Front Idler EX200 1 EX200 3 EX200 5

You Might Also Like

(0/10)

clearall