Track Link PC300-3 PC300-5

Track Link PC300-3 PC300-5

Production introduction

Track assy:            

Classification: There are two types: holistic and combined.            

The integral track is the meshing teeth of the track board, which tends to mesh with the driving wheel. The track board itself becomes the rolling track of the wheels such as the supporting wheel.            

Features: Easy to manufacture, but fast wear and tear.            

The multi-purpose combined excavator features small pitch, good rotation and fast walking speed. Long service life.            

Most of the materials used are light weight, high strength, simple structure and cheap rolling plate. There are single tendon, double tendon, three tendons and so on.            

Three tendons are commonly used in excavators. The characteristics are: the height of the rib is small, and the strength of the Caterpillar board is large. Smooth movement, low noise.            

There are generally four connecting holes on the track board, and two mud clearing holes in the middle, which are used to automatically remove clay. There are overlapping parts between two similar crawler boards to prevent damage caused by stones clamped in the middle.            

The excavator on wetland can use triangular track board, whose cross section is triangular, which can compact the soft ground and improve the supporting capacity.

Detailed information of Track Link PC300-3 PC300-5 as below:

Sizes Track Chain PC300-3 PC300-5

Track Link assy PC300-3 PC300-5

Manufacturers’ names, numbers, symbols and descriptions are used for reference purposes only and it is not implied that any part listed is the product of the manufacturers.

Characterristics

1. Hign-degree harden treatment ensure the most strength and wearness.

2. The track pin is done the tempering and the surface intermediate frequency quenching treatment,

which ensure the sufficient hardness of core and abrasion resistance of external surfaces.

3. The track bushing is done the tempering ensure the reasonale hardness of core and abrasion

resistance of internal and external surfaces.

Quality control procesures

When material come inside our factory, we need to analyze the material compostion. after several parts are heat treated, we need to check the hardness before all are done.And our inspectors will check the sizes at ramdom when parts are being machined or assembled

Particle Examination: Magneric Particle Test of Each Track Link to Eliminate Detective Product　

And we will check the size of every track bush hole of every link piece.

FAQ

1. Could you make customer logo?

Yes, we can make customer logos if it reach the moq for customer logo order.

2. If we don’t have drawings, could we develop a new item?

Yes, you can offer us the main dimension. Then we can compare with our ready products and make a drawing for your checking.

3. Could we be your exclusive dealer?

Yes, our policy is that we will not let our customer to compete at the same place.

Hot Tags: track link pc300-3 pc300-5, China, best, manufacturers, suppliers, factory, Track Link E330, Track Link For PC40 7, Track Link D60 8 D60 12 D65 8 D65 12, Bulldozer Track Shoe Group, Track Link SK320 SK330 8 SK350 8, Track Link E325