
D5n Bulldozer Track Roller
We supply bulldozer parts mainy for komatsu bulldozer and caterpillar bulldozer.
We devoted ourselves to bulldozer parts many years,covering most of the models.
we are expecting to be your long term partner in China.
Product Introduction
Products Description
d5n bulldozer track roller
A bulldozer track roller is an essential part of a bulldozer machine. It is a cylindrical metal component that supports the track chain and allows the bulldozer to move efficiently across rough terrain. The roller is made up of a durable steel outer shell and an inner bearing surface that rotates around the spindle. The bulldozer track roller is also responsible for maintaining tension in the track chain, ensuring that it remains securely attached to the sprocket and idler wheels.

d5n bulldozer track roller
Bimetal bushing of our track roller is based on steel plate which special alloy is sintered on it. It shows high loading ability and high ability of fatigue resistance.

d5n bulldozer track roller
Carry out the pressure test before oil injection, and there is no air leakage under the pressure of 0.5-0.6mpa;
Technical requirement
1. All parts shall be cleaned before assembly without any sundries;
2. Apply a small amount of clean oil to the grinding surface of the floating seal ring; ensure the axial direction after assembly
The displacement is 0.3-0.6 mm
3. Carry out the pressure test before oil injection, and there is no air leakage under the pressure of 0.5-0.6mpa;
4. After installation, inject clean sae80w-90 gear oil (the oil volume accounts for about the cavity
90% ~ 95% of the volume;
5. Run it in for 3-5 minutes after refueling to make it operate smoothly;
6. After the surface is clean, spray two coats of antirust paint.
Products parameters
| Track roller body type | Material | Welding type | Sprocket type | Loading container |
| Single flange | 50MN | Friction welding | Segment group | 20 feet container |
| Double flange | 40MN2 | Normal welding | Full rim | 40 feet container |
Product Picture


Our factory

Heattreatment

Welding

Assembly

Warehouse
Caterpillar Bulldozer Models Available:
D3C,D3K,D4D,D4H,D5B,D5K,D5N,D6C,D6D,D6H,D6R,D7G,D7F,D7H,D8K,D8N,D9N,D10N,D11N etc..
Hot Tags: d5n bulldozer track roller, China, best, manufacturers, suppliers, factory, Harvester Track Roller, Track Adjuster Assy, Carrier Roller MS110 5 MS120 8, Idler For HYUNDAI R60 5, Sprocket Rim E200B, Track Roller D4D For Bulldozer
You Might Also Like
Send Inquiry







