Kubota U35 Mini Excavator Parts

kubota u35 mini excavator parts

Production Description

An excavator track roller is one of the essential components of an excavator machine, and it plays a crucial role in helping the machine move and operate effectively. A high-quality excavator track roller must possess several essential conditions to ensure that it works efficiently and effectively.

 

Structure:

 

 

Sizes

 

 

Advantages kubota u35 mini excavator parts

 

1. Each roller shell is carefully heat treated to ensure long wear life and stress resistance.

2. Differential type of quenching or through type of quenching heattreatment can ensure certain heat treatment hardness depth and so give good anti-cracking effects.

 

Technical requirement

1. Check all parts strictly before assembly and clean them

2. A small amount of oil shall be applied to the mating surface of the shaft sleeve and straight shaft before assembly

3. The floating oil seal ring shall be assembled in pairs, and its sealing surface shall be coated with lubricating oil. O-ring and floating oil seal ring

The contact surface shall not be coated with grease, and the assembly of floating seal rubber ring shall not be twisted

4. During assembly, pay attention to the oil groove direction of the shaft and the installation plane of the side cover

5. After assembly, ensure that the axial clearance is 0.4-0.7mm. Rotate the wheel body by hand, and feel the resistance moment, but there is no jamming,

6. After installation, fill in the filtered lubricating oil and check that there is no leakage. Then run in for 3-5 minutes to make it run smoothly

7. The painting color shall comply with jb2299-78 or the customer's requirements

 

MODELS AVAILABLE:

KUBOTA:K008/K013/K030/K035/K040/K045/KH14/KH025/KH026/KH101/KH36/KH41/KH51/KH61/KH90/KX018/KX024/KX027/KX033/KX045KX057/KX080/KX101/KX121/KX161/KX36/KX41-2/KX41-3

 

FAQ

1. How About The Payment Terms?

TT 30 percent deposit,and TT 70percent balance after seeing the scan copy of bill of lading or LC at sight.

2. What Is The Delivery Time?

Generally speaking, the delivery time is 30 days. But if the whole order are 200 serial track roller(bottom roller, lower roller), the delivery time is from 10-15 days.

3. What Is MOQ For The Order?

FCL and LCL are both acceptable.

4. How Can You Control Your Quality?

When material come inside our factory, we need to analyze the material cost. And our inspectors will check the sizes at random when parts are being machined or assembled. All of these can guarantee the parts with correct sizes and good quality.

 

 

Hot Tags: kubota u35 mini excavator parts, China, best, manufacturers, suppliers, factory, Track Roller IHI18, Track Roller EX300 1 EX300 2 EX300 5, Mini Digger Track Roller U60, Mini Track Roller EX30, Track Roller ZAX200, Track Roller Assembly