Mini Backhoe Excavator Parts
It also called mini bottom roller and mini lower roller is used to support the weight of crawler excavators and roll on the track link. It is also used to keep track link to prevent it from lateral slippage. When the excavator steers, track roller force the track assy to skip on the ground.
Product Introduction
mini backhoe excavator parts
Production Description
Track rollers are an essential component of heavy machinery and equipment. They are designed to support the weight of the equipment and ensure smooth movement along the tracks. These rollers come in different sizes and are made of durable materials that can withstand heavy loads and harsh working conditions.
One of the main benefits of track rollers is that they help reduce friction between the tracks and the equipment. This results in lower energy consumption and increased efficiency in the operations of the machinery. Moreover, they also help improve the stability of the equipment and reduce the risk of accidents at the job
Structure mini backhoe excavator parts
Sizes mini backhoe excavator parts
Advantages
1.Each shaft is machined by the utilization of the most modern technological advances known to the industry, Grinding and finishing methods ensure mirror like finish and tempering with medium to low frequency heat treating equipment guarantees maximum strength.
2.Each mini excavator roller is precision machined to house special high impact low wear bimetal bushings.
Technical requirements:
1. Before installation, remove the slag on the surface of each part and clean it
2. Install the floating oil seal ring correctly. The surface is coated with pure oil film, and the O-ring shall not be twisted or skewed
3. The assembly must pass the sealing test without air leakage under the pressure of 0.6MPa
4. Each filling hole must be filled with diesel engine oil ecc40
5. After 6 minutes running in test, the manually rotating wheel body shall be light without jamming
6. Degrease the outer surface and spray two coats of antirust paint
MODELS AVAILABLE:
KUBOTA:K008/K013/K030/K035/K040/K045/KH14/KH025/KH026/KH101/KH36
KH51/KH61/KH90/KX018/KX024/KX027/KX033/KX045KX057/KX080/KX101/KX121/KX161/KX36/KX41-2/KX41-3
Our Factory:
Quanzhou Sanqi Engineering Machinery Co.ltd. Located in Quanzhou City which is the cultural captital of east asia,the starting point of the silk road at sea.We are a production-oriented enterprise which is engaged in casing,forging,machining,heattreamnt and assembly and commited to developing and manufacturing the udnercarriage parts of current world famaous brands (komatsu,hitachi,kobleco,kato,mitsubishi,yanmar,kubota,hyundai,doosan,volve,jcb,case )and chinese famous brands(like,sany,zoomlion,xugong,liugong,longgong etc..) crawler-track machinery like excavtors,bulldozers,cranes,drills etc. Our main parts are track roller,carrier roller,idler,sprocket(segements group),track link ,pin&bush,bolt&nut,track adjuster,boom cylinder,arm cylinder,bucket cylinder etc.
We don’t list out all of models we make. If any more items you need,please feel free to contact with us.
FAQ
1. What Is The Delivery Time?
Generally speaking, the delivery time is 20days to 45days.it depend on how many items for a order. But if the whole order are 200 serial track roller(bottom roller, lower roller), the delivery time is within 10days.
2. What Is MOQ For The Order?
Generally speaking, the MOQ is a full container load of 20 feet container. Under this condition, the single cost can be lowered. if customers ask for less full container load. It is also acceptable.
3. How Can You Control Your Quality?
When material come inside our factory, we need to analyze the material cost. And when front idlers and sprocket rims material are casted. We need to analyze the composition to see if the material is qualified or not. When track rollers, carrier rollers and front idlers are being assembled, we need to oil leakage testing. After several parts are heat treated, we need to check the hardness before all are done.And our inspectors will check the sizes at ramdom when parts are being machined or assembled. All of these can guarantee the parts with correct sizes and good quality.
Hot Tags: mini backhoe excavator parts, China, best, manufacturers, suppliers, factory, Excavator Track Rollers, Mini Track Roller VIO55 6, Lower Roller Shaft Type For Bulldozer, Lower Roller For Bulldozer, Mini Track Roller EX30, Track Roller PC20 5
You Might Also Like
Send Inquiry
