Quanzhou Sanqi Engineering Machinery Co.Ltd

enLanguage
Track Roller D9N

Track Roller D9N

Material:50MN
Hardness:HRC52-HRC58
Guarantee:3months

Product Introduction

TRACK ROLER D9N

PRODUCTION INTRODUCTION:

bottom roller d9n


The track roller is fixed under the wheel frame with screws to support the mass of the machine and distribute the mass on the track shoes. At the same time, it also relies on its roller flange to clamp the chain rail so as not to make the track slip laterally (derail), so as to ensure that the machinery moves along the track direction. The roller position at the front end shall ensure no interference when the tensioning wheel is adjusted to the final limit position and the buffer spring is compressed to the maximum value. There should be enough clearance between the tooth top of the drive sprocket and the hub of the roller to prevent mud accumulation
According to the structure, the roller can be divided into single side roller and double side roller, with sliding bearing and rolling shaft.


bulldozer track roller


The track roller body materials are generally 50Mn, 40Mn2, etc. the main process is casting or forging, machining, and then heat treatment. The hardness of the wheel surface after quenching should reach hrc52 ~ 58 to increase the wear resistance of the wheel surface. The machining accuracy of the roller axle is required to be high, generally it needs to be processed by numerical control machine to meet the requirements. There are more materials of 40Mn2, and quenching heat treatment should be carried out after processing. And the sliding bearing support and floating oil seal are used to prevent dust. The advantage of doing this is: generally, only one time of butter is added in an overhaul period, which simplifies the routine maintenance of the excavator.


Models available for caterpillar bulldozers:

lower roller d9n

MODEL
D3/D3B/D3C/D4B
D3K
D4D/D4E
 D4H W/CAPS
 D4H
D5C
D5/D5B/D5E/D6/D6B
D5H
D5M
D6C
D6D/D6E
D6H D6R
D7/D7C/D7D/D7E
D7F/D7G
D7H
D8H D8K
D8L
D8N
D9H
D9L
D9L
D9N D9R
 D10N

FAQ

1. What is the percent of your parts for overseas market?

70percent of our parts are for overseas market.

2. Is there any guarantee of your parts?

There are 6 months guarantee time for excacavar parts under normal working conditions and 3months guaranteet tiem for bulldozer parts under normal working conditions.

3. How do you offer guarantee?

If parts are broken due to manufacturing problem, we will deduct the value for next order amount or offer you brand new one to replce.

4. Could you make customer logo?

Yes,we can make customer logos if it reach the moq for customer logo order.

5. If we don’t have drawings, could we develop a new item?

Yes, you can offer us the main dimension. Then we can compare with our ready products and make a drawing for your checking.

6. Could we be your exclusive dealer?

Yes,our policy is that we will not let our customer to compete at the same place.


Hot Tags: track roller d9n, China, best, manufacturers, suppliers, factory, Mini Roller Track UK, Track Roller KH030, Kx91 3 Track Roller, Track Roller PC60 5, Track Roller D6D, Mini Track Roller U15

You Might Also Like

(0/10)

clearall