Track Undercarriage Parts

track undercarriage parts

Bulldozer undercarriage parts are an essential component of heavy construction equipment. They play a crucial role in maintaining stability and durability of the machine, ensuring optimal performance.

One of the most important factors that contribute to the efficiency of bulldozer undercarriage parts is its track system or commonly referred to as ‘crawler’. It is composed of a series of rotating tracks that enable a bulldozer to move forward and backward with ease and comfort. Unlike wheeled construction equipment, bulldozer undercarriage parts provide maximum stability and traction, especially on rough terrains or rocky landscapes.

There are different types of bulldozer undercarriage parts available in the market, but the most common and reliable are those designed with steel tracks. They are more durable and robust than rubber tracks, and they can endure extreme wear and tear, making them ideal for heavy-duty applications.

Maintaining bulldozer undercarriage parts is essential for its proper functioning and longevity. Regular inspections and maintenance are necessary to ensure the tracks, sprockets, and rollers remain tight, free of debris, and lubricated. Any signs of damage or tear should be repaired immediately to prevent further damage to the machine.

In conclusion, bulldozer undercarriage parts are critical components of heavy construction equipment. They provide the necessary stability, traction, and durability needed to ensure optimal machine performance. With proper maintenance and care, bulldozer undercarriage parts can last for years and help complete even the most challenging construction projects.

track undercarriage parts

Each shell is carefully heat treated to ensure long wear life and stress resistance.

track undercarriage parts

Bimetal bushing of our carrier roller is based on steel plate which special alloy is sintered on it. It shows high loading ability and high ability of fatigue resistance.

Technical requirements:

1. Before installation, remove the slag on the surface of each part and clean it

2. Install the floating oil seal ring correctly. The surface is coated with pure oil film, and the O-ring shall not be twisted or skewed

3. The assembly must pass the sealing test without air leakage under the pressure of 0.6MPa

4. Each filling hole must be filled with diesel engine oil ecc40

5. After 6 minutes running in test, the manually rotating wheel body shall be light without jamming

6. Degrease the outer surface and spray two coats of antirust paint

Heattreatment

Welding

Assembly

Warehouse