Excavator Maintenance
Excavator, also known as digger, is a kind of earthmoving machinery that uses a bucket to excavate materials above or below the surface of the carrier and loads them into transport vehicles or unloads them to the yard. It has become one of the main engineering machinery in the construction. In use, reasonable maintenance is an effective means to prolong the service life of the machine.
Daily inspection work is an important link to ensure that hydraulic excavators can maintain efficient operation for a long time. Especially for individual households, daily inspection work can effectively reduce maintenance costs.
First, check the appearance of the mechanical undercarriage and the abnormality of the mechanical chassis, as well as whether there is grease flow from the slewing support. Then check the retarder brake device and the bolt fasteners of the caterpillar. The tightening and timely replacement of the tightening should be done. If it is a wheel excavator, it is necessary to check whether the tires are abnormal and whether the pressure is different. Stability.
It is known that the wear of bucket teeth will greatly increase the resistance in the construction process, will seriously affect the work efficiency and increase the wear degree of equipment components.
Check whether there are cracks or oil leaks in the bucket rod and cylinder. Check the battery electrolyte to avoid being below the low level.
Air filter is an important part to prevent a large amount of dusty air from entering excavator. It should be checked and cleaned frequently.
Check fuel oil, lubricant, hydraulic oil, coolant, etc. frequently to see if they need to be added, and * select oil according to the instructions and keep it clean.
Fuel management
Different grades of diesel oil should be selected according to different ambient temperatures; diesel oil should not be mixed with impurities, lime soil and water, otherwise it will cause premature wear and tear of fuel pump; high paraffin and sulfur content in inferior fuel oil will damage the engine; after daily operation, the fuel tank should be filled up to prevent water droplets on the inner wall of the fuel tank; Open the drain valve at the bottom of the fuel tank to drain water. After the engine fuel is exhausted or the filter element is replaced, the air in the road must be discharged.
Management of other oils
Other oils include engine oil, hydraulic oil, gear oil and so on; different grades and grades of oils can not be mixed; different types of excavator oils in the production process add different chemical or physical additives; to ensure that the use of oil clean, to prevent impurities (water, dust, particles, etc.) into; according to environmental temperature; And the label of oil for use. When the ambient temperature is high, the oil with high viscosity should be chosen, and when the ambient temperature is low, the oil with low viscosity should be chosen; the viscosity of gear oil is relatively large to adapt to the larger transmission load, and the viscosity of hydraulic oil is relatively small to reduce liquid flow resistance.
Lubricating grease management
The use of lubricating oil (butter) can reduce the wear of the moving surface and prevent noise. The grease should not be mixed with dust, sand, water and other impurities during storage and storage; lithium-based grease G2-L1 is recommended for good wear resistance and suitable for heavy load conditions; when filling, the old oil should be extruded and scrubbed as far as possible to prevent sand from adhering.
Maintenance of filter element
The filter element plays the role of filtering impurities in the oil or gas passage to prevent them from intruding into the system and causing malfunction; all kinds of filter elements should be replaced regularly according to the requirements of operation and maintenance manual; when replacing the filter element, it should check whether there is metal attached to the old filter element, if metal particles are found, timely diagnosis and improvement measures should be taken; use conformity machine. Pure filter element specified by the device. The filtering ability of fake and inferior filter elements is poor, and the surface of the filter layer and the quality of the material do not meet the requirements, which will seriously affect the normal use of the machine.
5. Contents of Periodic Maintenance
(1)The fuel filter element and additional fuel filter element should be replaced after 250 hours of operation of the new engine, and the clearance of the engine valve should be checked.
(2) Daily maintenance; inspection, cleaning or replacement of air filter element; cleaning of cooling system interior; inspection and tightening of caterpillar plate bolts; inspection and adjustment of caterpillar reverse tension; inspection of intake heater; replacement of bucket teeth; adjustment of bucket clearance; inspection of cleaning liquid level of front window; inspection and adjustment of air conditioning; cleaning of cab floor; replacement of filter element of crusher (optional accessories). When cleaning the inside of cooling system, when the engine is fully cooled, slowly unscrew the nozzle cover, release the internal pressure of the water tank, and then release the water; do not clean the engine while working, the high-speed rotating fan will cause danger; when cleaning or replacing the coolant, the machine should be parked on the horizontal ground. (3) Check items before starting the engine. Check the liquid level height of coolant (add water); check engine oil level, add oil; check fuel level (add oil); check hydraulic oil level (add hydraulic oil); check whether air filter is blocked; check the wire; check whether the horn is normal; check the lubrication of bucket; check water and sediment in oil-water separator.
Every 100 maintenance items. Moving arm cylinder head pin; Moving arm pin; Moving arm cylinder rod end; Bucket rod cylinder head pin; Moving arm, Bucket rod connecting pin; Bucket cylinder rod end; Bucket cylinder head pin; Half rod connecting pin; Bucket rod, Bucket cylinder rod end; Bucket cylinder head pin; Bucket rod connecting pin; Check the oil level in the rotary mechanism box (refueling); Drain water and sediment from the fuel tank.
Maintenance items every 250 hours. Check the oil level in the final transmission box (add gear oil); check the battery electrolyte; replace the oil in the engine oil pan, replace the engine filter; lubricate the rotary support (2 places); check the tension of fan belt, and check the tension of air conditioning compressor belt, and make adjustments.
Maintenance items every 500 hours. At the same time, maintenance projects are carried out every 100 and 250 hours; fuel filter element is replaced; lubricating grease height of rotary pinion is checked (grease added); radiator fins, oil cooler fins and chiller fins are checked and cleaned; hydraulic oil filter element is replaced; oil in the final transmission box is replaced (only * at 500 hours, once after 1000 hours); air filter element inside and outside the air conditioner system is cleaned; hydraulic oil is replaced. Vent filter element. Maintenance items per 1000 hours. At the same time, the maintenance items are carried out every 100, 250 and 500 hours; the oil in the rotary mechanism box is replaced; the oil level of the shock absorber shell is checked (return oil); all fasteners of the turbocharger are checked; the clearance of the turbocharger rotor is checked; the tension of the generator belt is checked and replaced; the anti-corrosion filter core is replaced; and the oil in the final transmission box is replaced.
Maintenance items every 2000 hours. First complete the maintenance project every 100, 250, 500 and 1000 hours; clean the hydraulic tank filter; clean and check the turbocharger; check the generator, start motor; check the engine valve clearance (and adjust); check the shock absorber.
Maintenance for more than 4000 hours. Inspection of pumps should be increased every 4000 hours and replacement of hydraulic oil should be added every 5000 hours.
Long-term storage. When the machine is stored for a long time, in order to prevent the piston rod of the hydraulic cylinder from rusting, the working device should be placed on the ground; the whole machine should be washed and dried and stored in the indoor dry environment; if the condition is limited, the machine should be parked on the well-drained cement floor; before storage, fill the fuel tank, lubricate all parts, replace the hydraulic oil and oil, and the exposed gold of the piston rod of the hydraulic cylinder. A thin layer of butter is coated on the surface, the negative terminal of the battery is removed, or the battery is unloaded and stored separately; an appropriate proportion of antifreeze is added to the cooling water according to * low ambient temperature; the engine is started once a month and the machine is operated to lubricate the moving parts while charging the battery; the air conditioner is turned on for refrigeration operation for 5-10 minutes. There is a saying that "if you want to do a good job, you must first use the right tools." Effective maintenance can reduce the probability of machine failure. Above is the maintenance method of excavator, hope to help friends in need.







