Excavators For Various Buckets And Their Role

1. Earth Bucket.Earth Bucket Most commonly, the general backhoe excavator is fitted with a earthwork bucket. Suitable for general clay excavation and sand, soil, gravel loading and other light operating occasions for the use of operations.Reinforced earthwork can be excavated hard soil, mixed with softer soil, softer stone, gravel, gravel loading and other heavy-duty operations.

2. Rock Bucket The high stress part is particularly strengthened, the abrasive part is thicker and the bottom has a stiffeners. In the bucket teeth, bucket wings, side teeth, the bottom of the bucket are reinforced, in addition to the rock bucket to increase the side guard plate, the installation of protective panels.It is suitable for the excavation of hard rocks, Zhijian and wind fossils mixed in soil, and heavy duty operation such as Tsuneishi and loading of ore after blasting.

3, loose soil bucket Mainly used in hard soil, Zhijian, wind fossils crushing, excavation and loading, or permafrost construction operations, generally have single teeth or multiple teeth, sharp teeth, easy to groundbreaking.There are high strength loose soil teeth installed on the bucket, which has a large excavation strength, and the loose soil excavation is completed once, and the operation is efficient.

4. Rake Bucket.Shape like rake, generally wider, divided into 5 teeth or 6 teeth, mainly used in mine engineering, water conservancy projects and other clean-up use.

5, Grille bucket The design is similar to the standard bucket, but its bottom is sieve mesh, the volume is generally larger. Suitable for separation of the softer mining materials, excavation and separation once completed.Widely used in municipal, agricultural, forest industry, Water Conservancy, earthwork and other projects.

6. Thumb Bucket A bezel is installed in front of the bucket, which reduces the possibility of material overturning or can be crawled directly.Suitable for excavation where the material is easy to flip, especially for loading higher lift.

7, Gutter Bucket Excavator Gutter bucket is suitable for excavation of various shape trenches, in order to meet different operational requirements, gutter bucket bucket has a variety of widths and shapes, such as rectangles, trapezoid, triangles and so on.Trench excavation once formed, generally do not need to be trimmed, the operation efficiency is high.

8. Mud Bucket.Mud Bucket has become a dredging bucket, no bucket teeth, width is large, mud bucket is very suitable for the need for larger capacity of the slope, such as the plane trimming, river, ditch and other dredging work.

9. Tilt Bucket Tilt Bucket in the existence of all the characteristics of the mud bucket, but also through the cylinder action to control the rotation of the bucket, the maximum tilt angle of 45 degrees, without changing the position of the excavator can carry out the operation, easy to complete the ordinary bucket can not complete the precise operation. Suitable for brushing slope, whole equal plane recess and river channel, ditch and other dredging work. (Note: Mud bucket and tilt bucket are not suitable for heavy working environment such as hard soil and rock-solid soil excavation.)

10, trapezoidal bucket Excavator Trapezoidal Bucket has a variety of sizes and shapes, such as triangular or trapezoidal. Suitable for Water conservancy, highway, agriculture and pipeline trench and other operations.The characteristic is that it can be molded at one time and the operation efficiency is very high.