
141-30-00566 Bulldozer Upper Roller
Hardness:HRC52-58
Material:50MN
Machine type:Crawler tracked type
Product Introduction
141-30-00566 bulldozer upper roller
PRODUCTION INFORMATION:
A bulldozer upper roller is an essential component of crawler-type bulldozers. It is located on the upper part of the machine and provides support for the tracks. The bulldozer upper roller is designed to ensure that the tracks remain stable, even in uneven terrains.
The bulldozer upper roller is usually made of high-quality steel and is built to withstand heavy loads and harsh weather conditions. It serves as a guide for the tracks and helps in distributing the machine's weight evenly on the tracks. The roller also helps to absorb shock and vibrations, reducing the amount of wear and tear on the tracks and the entire machine.
Technical Requirements Of 141-30-00566 bulldozer upper roller
1.Each bulldozer upper rollers shaft is machined by the utilization of the most modern technological advances known to the industry, Grinding and finishing methods ensure mirror like finish and tempering with medium to low frequency heat treating equipment guarantees maximum strength.
2.Each bulldozer upper rollers is precision machined to house special high impact low wear bimetal bushings.
3.Lubrication oil of our bulldozer top rollers is selected carefully. It can lubricate shaft and bushing well to lower the wearing utmostly. And it can cool the roller perfectly. Those maximize the inner structure life.
Cross Part Number:
141-30-00560
141-30-00561
141-30-00562
141-30-00563
141-30-00564
141-30-00565
141-30-00566
141-30-00568
144-813-0050
144-813-0051
144-813-0052
144-813-0053
Technical requirement Of 141-30-00566 bulldozer upper roller
1. All parts shall be cleaned before assembly without any sundries;
2. Apply a small amount of clean engine oil to the grinding surface of the floating seal ring;
3. Carry out the pressure test before oil injection, and there is no air leakage under the pressure of 0.5-0.6mpa;
4. After installation, inject clean sae80w-90 gear oil (the oil volume accounts for about the cavity
90% ~ 95% of the volume;
5. After the surface is clean, apply two coats of gray antirust paint.

Regular Maintenance of Bulldozers
Bulldozers are an essential piece of heavy machinery used in construction sites to move soil, rocks, and debris. The proper maintenance of bulldozers can extend their lifespan, improve their performance, and save money on costly repairs. Here are some tips for regular maintenance of bulldozers:
1. Inspect the bulldozer before each use. Ensure that all systems are working correctly, including the engine, hydraulics, brakes, and tracks. Check for any loose or damaged parts, and replace them promptly.
2. Keep the bulldozer clean. Regularly clean the exterior and interior of the bulldozer to remove dirt, debris, and grime. Use a pressure washer if necessary, but avoid using high pressure on delicate parts.
3. Change the oil regularly. Changing the oil at the recommended intervals is essential in maintaining the engine's longevity. Old oil can cause friction and damage the engine's internal parts.
4. Keep the air filter clean. The air filter traps dust and debris, preventing them from entering the engine. A dirty air filter reduces the engine's efficiency and can cause excessive wear on internal parts.
5. Check the fuel filter. The fuel filter prevents dirt and debris from entering the fuel system, which can cause damage to the engine. Regularly inspect the fuel filter and replace it as needed.
6. Maintain the hydraulic system. The hydraulic system controls the bulldozer's movements, and it is vital to keep it clean and well-lubricated. Check the hydraulic oil level and replace it when necessary.
7. Keep the tracks in good condition. The bulldozer's tracks are essential in its operation, and they should be regularly checked for wear and damage. Replace any damaged or worn-out tracks immediately.
With proper maintenance, a bulldozer can last for many years. Regular maintenance not only extends the lifespan of the bulldozer but also ensures safety for workers on the construction site. Remember, a well-maintained bulldozer is an efficient and reliable piece of machinery that can help complete construction projects on time and within budget.
FAQ
1. Could We Be Your Exclusive Dealer?
Yes,our policy is that we will not let our customer to compete at the same place.
2. What Is MOQ For The Order?
FCL and LCL are both acceptable.
3. How About The Payment Terms?
TT 30 percent deposit,and TT 70percent balance after seeing the scan copy of bill of lading or LC at sight.
Hot Tags: 141-30-00566 bulldozer upper roller, China, best, manufacturers, suppliers, factory, Carrier Roller DH220, Carrier Roller HD1250, Carrier Roller E320, Upper Roller For Bulldozer, carrier roller pc100 3 pc120 3 pc100 5 pc120 5, Bulldozer Upper Roller Group
You Might Also Like
Send Inquiry







