
144-813-0050 Bulldozer Top Roller
Hardness:HRC52-58
Material:50MN
Machine type:Crawler tracked type
Product Introduction
144-813-0050 bulldozer top roller
Product Introduction
The bulldozer top roller for bulldozer is used to hold the track upward so that the track has a certain degree of tension.
We offer a wide range of top roller for bulldozer for the most popular models.our lower rollers are engineered with nodular iron and forged steel which is through a proper heat treatment allowing durability and impact. Our bulldozer upper roller are highly praised in the market as a product with impact resistance and a long life
technical requirement of 144-813-0050 bulldozer top roller
1. All parts shall be cleaned before assembly without any sundries;
2. Apply a small amount of clean oil to the grinding surface of the floating seal ring; ensure the axial direction after assembly
The displacement is 0.3-0.6 mm
3. Carry out the pressure test before oil injection, and there is no air leakage under the pressure of 0.5-0.6mpa;
4. After installation, inject clean sae80w-90 gear oil (the oil volume accounts for about the cavity
90% ~ 95% of the volume;
5. Run it in for 3-5 minutes after refueling to make it operate smoothly;
6. After the surface is clean, spray two coats of antirust paint.
Structure of 144-813-0050 bulldozer top roller

Cross Part Number:
141-30-00560
141-30-00561
141-30-00562
141-30-00563
141-30-00564
141-30-00565
141-30-00566
141-30-00568
144-813-0050
144-813-0051
144-813-0052
144-813-0053
FAQ
1. Are You A Manufacturer Or A Trader?
We are a manufacturer. We do forging and casting by ourselves. And our factory is located in Quanzhou city, Fujina, China.
2. How Can I Be Sure The Part Will Fit My Excavator?
Give us correct model number/machine serial number/ any numbers on the parts itself. Or measure the parts give us dimension or drawing.
3. What Is The Package? Can I Print My Logo Or Brand On The Package?
The normal package is below:
Honed tubes package: oilded and capped on tub end. PE sheet bundles wrapped package or as per request.
Chrome plated bars package: oiled and protected by hardboard sleeves, then in seaworty wooden case.
Hydaulic cylinder package: wrapped by PE film and packed in strong wooden case.
Logo or marking will be as per customer's request.
Hot Tags: 144-813-0050 bulldozer top roller, China, best, manufacturers, suppliers, factory, Carrier Roller PC300 7, Carrier Roller DH220 DH220 5 DH220 7 DH220 9, Carrier Roller SH60, Bulldozer Upper Roller Group, Crawler Tracked Crane Top Roller, Carrier Roller EX60 1
You Might Also Like
Send Inquiry







