Carrier Roller UH063

Carrier Roller UH063

The carrier roller uh063 is to hold the track upward, so that the track has a certain degree of tension.

Technical Requirements Of Top Roller UH063

1. Check all parts strictly before assembly and clean them.

2. A small amount of oil shall be applied to the mating surface of the shaft sleeve and the straight shaft before assembly. 

3. The floating oil seal ring shall be assembled in pairs, and its sealing surface shall be coated with lubricating oil. The contact surface between O-ring and floating oil seal ring shall not be coated with lubricating grease, and the assembly of floating oil seal rubber ring shall not be twisted.

4. After assembly, rotate the wheel body by hand, with a certain resistance moment, but without jamming imagination.

5. After assembly, fill in the filtered lubricating oil and check that there is no leakage.

CARRIER ROLLER UH063

Models of top roller of hitachi old version excavators:

FAQ

1. Are You A Manufacturer Or A Trader?

We are a manufacturer. We do forging and casting by ourselves. And our factory is located in Quanzhou city, Fujina, China.

2. How Could You Know If Our Parts Are Fitted To Machines?

Please offer us the detailed machine models or mounting sizes.

3. How About The Payment Terms?

TT 30 percent deposit,and TT 70percent balance after seeing the scan copy of bill of lading or LC at sight.

4. What Is The Delivery Time?

About 30days, But if the whole order are 200 serial track roller(bottom roller, lower roller), the delivery time is within 10days.

UPPER ROLLER UH063

Hot Tags: carrier roller uh063, China, best, manufacturers, suppliers, factory, Excavator Carrier Roller Group, Carrier Roller R200, Carrier Roller MS070, Bulldozer Upper Roller Group, Carrier Roller PC1250, Crawler Tracked Crane Top Roller