Quanzhou Sanqi Engineering Machinery Co.Ltd

enLanguage
Vio70cr Excavator Upper Roller

Vio70cr Excavator Upper Roller

We can manufacture around 25000pcs of track carrier rollers one month.

Product Introduction

vio70cr excavator upper roller

An excavator upper roller is an essential component of an excavator machine that helps in smooth and efficient operation. It is a metal wheel placed at the top end of the excavator's undercarriage, which supports the weight of the machine and ensures optimal performance during excavation.

 

Sizes of vio70cr excavator upper roller

 

详情图 1  mini excavator carrier rollers

 

Structure of vio70cr excavator upper roller

 

详情图 2 mini excavator top rollers

Technical requirement

1. Before assembly, the sharp angle and burr of the parts shall be removed, and the bore, bearing, oil seal and other parts in the wheel body shall be cleaned.

2. Floating oil seal and other parts shall not be scratched or bruised.

3. The floating seal rubber ring shall not be stained with oil or twisted during assembly.

4. A small amount of oil shall be applied to the pressure fitting surface and floating oil seal fitting surface during assembly.

5. After assembly, inject 700ml of vehicle gear EP oil with clean capacity, and check after 4 hours to ensure there is no leakage.

6. The painting color of the assembly shall be in accordance with the customer's requirements.

Packing

9pcs per pallet,several pallets as a pile up to the weight around 3t

12pcs per pallet, several pallets as a pile up to the weight around 3t

15pcs per pallet, several pallets as a pile up to the weight around 3t

20pcs per pallet, several pallets as a pile up to the weight around 3t

 

详情图 3 excavator carrier rollers

 

Wooden case for mini excavator upper rollers

 

详情图 4 mini excavator carrier rollers

 

interchangable models:

B5,B50,B50.1,B50.2,B50.2A,VIO50,VIO50CR,VIO50PR,VIO70,VIO70A,VIO75,VIO75A,VIO75V

 

FAQ

1. You Are A Trader Or A Manufacture?
We are a factory with casting and forging
2. How Can I Be Sure The Part Will Fit My Excavator?
Give us correct model number/machine serial number/ any numbers on the parts itself. Or measure the parts give us dimension or drawing.
3. How About The Payment Terms?
We usually accept T/T or L/C. other terms also could be negotiated.
4. What Is Your Minimum Order?
It depends on what you are buying. Normally, our minimum order is USD5000. one 20' full container and LCL container (less than a container load) can be acceptable.

 

 

Hot Tags: vio70cr excavator upper roller, China, best, manufacturers, suppliers, factory, Bottom Roller For Crawler Tracked Crane, Front Idler PC200 2, Mini Track Roller SK025SR, Track Roller Friction Welding, Front Idler ZAX200 5G, Bulldozer Track Group

You Might Also Like

(0/10)

clearall