
Product Introduction
DH300 EXCAVATOR IDLER
Production introduction:
The idler is used to guide the track to rotate correctly to prevent its deviation and derailment.
Most excavators also act as supporting wheels. This can increase the contact area between the track and the ground and reduce the grounding voltage.
The wheel surface of the guide wheel is made into a smooth surface, and the middle arm ring acts as the guide, while the torus on both sides supports the rail chain.
Structure of DH300 EXCAVATOR IDLER

DH300 EXCAVATOR IDLER

DH300 EXCAVATOR IDLER HEAT TREATMENT:

DH300 EXCAVATOR IDLER PACKING:

The Daewoo DH300 excavator is an exceptional piece of machinery that features a compact design and unparalleled performance. With its powerful engine and efficient hydraulic system, the DH300 is capable of handling even the toughest tasks with ease. Whether you're working on a construction site, mining operation, or road building project, this excavator is sure to impress.
One of the standout features of the DH300 is its advanced hydraulic system, which provides precise control and smooth operation. This allows operators to work more efficiently and accurately, reducing the risk of mistakes and accidents. Additionally, the DH300 is designed for maximum comfort and safety, with a spacious and ergonomic cab that features excellent visibility and easy-to-use controls.
Overall, the Daewoo DH300 is an impressive piece of equipment that is sure to make your work easier and more efficient. So if you're in need of a reliable and powerful excavator, look no further than the DH300. With its advanced features and unbeatable performance, it's the perfect machine for any job.
Advantages
1. Good metal fibrous tissue and special heat treatment brings them longer life.
2. Resist abrasion and impact well; Prevent fragmentation well.
3. Using low and high-double seal makes it life lubrication
4. High flexibility and hydrocarbon-type regulator which is avaiable for mine working condition.
Attentions while assembling the Front idler rollers
1. Before assembling rollers,smooth the sharp part of sapre parts and do the deburring,clean the inner holes of the roller body and oil seal etc..
2. Do not break and scratch any part of the sealing parts.
3. Do not oil and distort the rubber floating seal ring during assembling the rollers.
4. A small amount of oil should be covered on the contacting surface while fitting the floating seal group.
5. After finishing the assembling process,fill clean extreme-pressure vehicle gear oil to take 80 percent of the inner cavity of roller body and do the running test then confirm no leakage after 4 hours.
MODELS OF DAEWOO EXCAVATORS:
DH35,DH55,DH150,DH220,DH280,DH300,DH500 ETC..
FAQ
1. How Can I Be Sure The Part Will Fit My Excavator?
Give us correct model number/machine serial number/ any numbers on the parts itself. Or measure the parts give us dimension or drawing.
2. How About The Payment Terms?
We usually accept T/T or L/C. other terms also could be negotiated.
3. What Is Your Minimum Order?
It depends on what you are buying. Normally, our minimum order is USD5000. one 20' full container and LCL container (less than a container load) can be acceptable.
Hot Tags: dh300 excavator idler, China, best, manufacturers, suppliers, factory, Excavator Front Idler, Front Idler D7F, Excavator Idler Group, Carrier Roller, Front Idler HD720, Idler For MITSUBISHI MS110 5
You Might Also Like
Send Inquiry







