Product

Home / Product/ Undercarriage Parts / Front Idler

Front Idler Dozer

bracket type,not bracket type
rockbush type,non rock bush type
forgeing shaft type,not forging shaft

Send Inquiry

Product Introduction

front idler dozer

A bulldozer idler is an important component of a bulldozer machine. It is a device that is used to support and guide the track links of a bulldozer. The idler is located at the front of the track frame and is designed to absorb the shock and vibration of the track while the machine is in operation.

features

The heavy profiles of idler roller rims are carefully heat treated in depth for extra service life.

mission

We supply high quality front idler dozer at reasonable prices.

system of values

Leadership, speed, service, sharing, passion, positivity, curiosity.

company philosophy

Pioneering, innovating, breaking through, creating

Advantages

Brackets

Brackets of idler roller are made by ductile iron. It shows exceptional resisitance to shock.

Bimetal Bushing

Bimetal bushing of our front idler is based on steel plate which special alloy is sintered on it. It shows high loading ability and high ability of fatigue resistance.

Cost Saving Service Life

The heavy profiles of idler roller rims are carefully heat treated in depth for extra service life.

Floating Seal Group

Floating seal group of our of idler group has super seal performance under bad working conditions like being muddy or steamy etc.. it is applicable for the condition of low speed and heavy load. And it is anti-friction and can be auto-compensated after wearing.

Lubrication Oil

Lubrication oil of our idler assy is selected carefully. It can lubricate shaft and bushing well to lower the wearing utmostly. And it can cool the roller perfectly. Those maximize the inner structure life.

Attentions While Assembling The Rollers

1. Before assembling rollers,smooth the sharp part of sapre parts and do the deburring,clean the inner holes of the roller body and oil seal etc..

2. Do not break and scratch any part of the sealing parts.

3. Do not oil and distort the rubber floating seal ring during assembling the rollers.

4. A small amount of oil should be covered on the contacting surface while fitting the floating seal group.

5. After finishing the assembling process,fill clean extreme-pressure vehicle gear oil to take 80 percent of the inner cavity of roller body and do the running test then confirm no leakage after 4 hours.

FAQ

1. What Is The Delivery Time?

For the excavator parts,normally we can offer within 30days.but if for bulldozer parts,normally 45days.

If we have them in stock, we can ship them out with 7days.

2. What Is The Warranty Of Your Parts?

For normal usage,6 month or 2000 house guarantee for excavator rollers and links.

3. What Is Your Payment Terms?

You can choose TT,LC,DP,DA,WESTERM UNIO

4. What Are The Packages Of Your Products?

We can offer fumigated wooden pallets/boxes,polywoode pallets/boxes.

5. Where Is Your Sea Port?

Our nearest seaport is XIAMEN PORT,China.