Product Introduction
Front Idler H45
Production introduction:
The guide wheel is used to guide the track to rotate correctly to prevent its deviation and derailment.
Most excavators also act as supporting wheels. This can increase the contact area between the track and the ground and reduce the grounding voltage.
The wheel surface of the guide wheel is made into a smooth surface, and the middle arm ring acts as the guide, while the torus on both sides supports the rail chain.
Casting of front idler H45
Casting idler roller body:
Structure of idler roller H45
Advantages / Features
1. Through quench-tempering processes to guarantee excellent mechanical properties, high strength and superior wear resistence to bending and breakage.
2. Surface hardness HRC48-56 for reduced wear and longer life, adding value to your products further to your business by maximizing durability of your products.
3. Precise design, carefully manufactured for proper fix easy grousering heavy loaded capacity up to 50tons without compromising proper functioning of the excavators reliable quality, high cost performance,quality services.Our products, your best choice.
MODELS OF IDLER GROUP:
| PC05/PC07 | SK045SR | CX50/55 |
| PC10-7 | SK024/SK025 | TB015 |
| PC12/15R | SK030 | TB016 |
| PC18MR | SK042-1 | TB068 |
| PC20-3 | SK042-2 | TB125 |
| PC20-7 | SK045-1 | TB135 |
| PC30-2 | SK045-2 | TB140 |
| PC30-6 | SK60-3 | TB145 |
| PC35 | SK60-5 | TB150 |
| PC20/30(rubber） | SK60-8 | TB175 |
| PC20R-8 | SK75 | KH025 |
| PC30MR-1 | SK45SR-3 | U10-3 |
| PC38UU | SK50SR-3 | U15-3 |
| PC40-5 | SK70SR | U17-3 |
| PC40-6 | SK135SR | U20-2/3 |
| PC40-7 | SH30 | U30-2/3 |
| PC45 | SH55 | U40-2/3 |
| PC40MR-2 | SH60 | U50-3 |
| PC50MR-2 | SH65 | U60 |
| PC50 | SH75 | U80/U85 |
| PC56-7 | VIO15-1 | K030 |
| PC60-5 | VIO15-2 | K040 |
| PC60-7 | VIO20-1 | K045 |
| PC75UU-2/3 | VIO20-2 | H30 |
| EX08 | VIO30-1 | H40 |
| EX12/EX15 | VIO30-2 | H45 |
| EX20/EX22 | VIO35 | KX36 |
| EX25/EX30 | VIO40-2 | KX41-3 |
| UE30 | VIO50/55 | KX61 |
| EX35 | VIO60 | KX91-3 |
| EX40-1 | VIO70 | KH90 |
| EX40-2 | VIO75 | KX101/KH101 |
| AX40U-2 | VIO80 | KX121 |
| AX40U-3 | B19/B19-3 | KX135 |
| AX40U-4 | B27-3 | KX155 |
| EX45 | B37-2 | KX161 |
| EX50 | B50 | KX185 |
| ZX30U | B70 | DH35 |
| ZX40 | IHI18J | DH55 |
| ZX50 | IHI25J | DH80 |
| EX55 | IHI30J | DX60 |
| EX60-1 | IHI35J | HD140 |
| EX60-2/3 | IHI45J | HD250 |
| EX60-5 | IHI50J | Bobcat320 |
| CAT301 | IHI55J | Bobcat425 |
| CAT301.8 | IHI30NX | Bobcat322 |
| CAT302.5 | IHI35NX | Bobcat325 |
| CAT303/304 | IHI45NX | Bobcat331 |
| E30 | IHI50NX | Bobcat337 |
| E45 | IHI55NX | SEW30 |
| E305 | IHI60NX | SEW50 |
| E304CR | IHI65NX | SEW70 |
| E305MR | IHI40G | SEW90 |
| E305.5 | IHI50G | MS30 |
| E307/E308 | IHI80J | MS40 |
| E70B | MM30 | MS070B |
| SK15 | MM35B | EC15/20 |
| SK015SR | MM45T | EC25 |
| SK020 | MM45B | EC30 |
| SK020SR | MM55SR | EC55 |
| SK035SR |
FAQ
1. How about the payment terms?
TT 30 percent deposit,and TT 70percent balance after seeing the scan copy of bill of lading or LC at sight.
2. What is the delivery time?
Generally speaking, the delivery time is 30 days. But if the whole order are 200 serial track roller(bottom roller, lower roller), the delivery time is from 10-15 days.
3. What is MOQ for the order?
FCL and LCL are both acceptable.
4. How can you control your quality?
When material come inside our factory, we need to analyze the material cost. And our inspectors will check the sizes at random when parts are being machined or assembled. All of these can guarantee the parts with correct sizes and good quality.
Hot Tags: front idler h45, China, best, manufacturers, suppliers, factory, Idler For HITACHI ZAX200 3, Front Idler D155 3, Front Idler EX30, Track Crane Idler, Idler For CATERPILLAR E330, Front Idler D85
You Might Also Like
Send Inquiry
