Front Idler JS140

Front Idler JS140

Prdocut introductino:

A tracked vehicle uses a combination of wheels and rollers, including drive sprockets, idler wheels, track return rollers and road wheels. It is quite similar in concept to a conveyor belt, only instead of a machine carrying objects on top of a powered continuous belt, it's a machine that moves itself over a continuous belt. In a typical application, power is transmitted to a drive sprocket (or drive wheel), which drives the track around its loop. On the opposite end of the vehicle, there is an idler wheel, which provides a pulley wheel  of sorts. On some applications, the drive sprocket and idler wheel carry some of the weight of the vehicle, for the purposes of this description, we will assume the drive sprocket and idler wheel are not weight-bearing units, and the drive sprocket is on the front . Since the drive sprocket can be at either the front or the rear of the vehicle depending on the design, the idler wheel either carries the track back off the ground and returns it to the drive sprocket (rear idler wheel), or receives track from the drive sprocket and lays it down in front of the road wheels (front idler wheel). The idler wheel is not powered, just like an idler gear. 

Structure of front idler js140:

Casting of idler roller js140:

Machining of idler group js140:

Models of jcb excavator idler assy :

Advantages / Features idler assy js140

1. Through quench-tempering processes to guarantee excellent mechanical properties, high strength and superior wear resistence to bending and breakage.
2. Surface hardness HRC48-56 for reduced wear and longer life, adding value to your products further to your business by maximizing durability of your products.
3. Precise design, carefully manufactured for proper fix easy grousering heavy loaded capacity up to 50tons without compromising proper functioning of the excavators reliable quality, high cost performance,quality services.Our products, your best choice.

FAQ

1. How can you control your quality?

When material come inside our factory, we need to analyze the material cost. And when front idlers and sprocket rims material are casted. We need to analyze the composition to see if the material is qualified or not. When track rollers, carrier rollers and front idlers are being assembled, we need to oil leakage testing. After several parts are heat treated, we need to check the hardness before all are done.And our inspectors will check the sizes at ramdom when parts are being machined or assembled. All of these can guarantee the parts with correct sizes and good quality.

2. What is the percent of your parts for overseas market?

70percent of our parts are for overseas market.

3. Is there any guarantee of your parts?

There are 6 months guarantee time for excacavar parts under normal working conditions and 3months guaranteet tiem for bulldozer parts under normal working conditions.

4. How do you offer guarantee?

If parts are broken due to manufacturing problem, we will deduct the value for next order amount or offer you brand new one to replce.

Hot Tags: front idler js140, China, best, manufacturers, suppliers, factory, Front Idler Kx185, Idler For KOMATSU PC200 1, Front Idler JS200 JS210 JS220, Front Idler DH220, Front Idler MS180 3 MS180 8, Idler For Kato HD250