Quanzhou Sanqi Engineering Machinery Co.Ltd

enLanguage
Idler Assy Excavator

Idler Assy Excavator

bracket type,not bracket type
rockbush type,non rock bush type
forgeing shaft type,not forging shaft

Product Introduction

bulldozer idler roller
 
idler assy excavator
 

An excavator idler is a critical component of an excavator's undercarriage, which supports the weight of the machine and allows it to travel over rough terrain. This essential part works in a pair with the front idler wheel to help distribute weight evenly across the tracks, which increases stability and reduces wear and tear on other components. In this article, we will discuss three types of excavator idlers, standard, reinforced, and rock types.

 

 

features

The heavy profiles of idler roller rims are carefully heat treated in depth for extra service life.

mission

We supply high quality idler assy excavator at reasonable prices.

system of values

Leadership, speed, service, sharing, passion, positivity, curiosity.

company philosophy

Pioneering, innovating, breaking through, creating

idler machining

Advantages Of Idler Assy 

Bimetal Bushing

Bimetal bushing of our mini shovel front idler is based on steel plate which special alloy is sintered on it. It shows high loading ability and high ability of fatigue resistance.

idler casting

 

When it comes to heavy machinery like excavators, there are many parts that are essential for their proper functioning. Two such parts are the idler and sprocket. Understanding the differences between these two is important for anyone who works with heavy machinery.

The idler is a component that helps to maintain the tension of the tracks on the excavator. The main role of the idler is to guide the track around the sprocket and provide support for the track chain. The idler is mounted on tensioning assemblies that are attached to the track frame. The idler also absorbs the weight of the excavator and is therefore made to be very strong and durable.

On the other hand, the sprocket is a round, toothed wheel that is used to drive the excavator. The sprocket is connected to the motor and as it rotates, it turns the tracks, propelling the machine forward. The sprocket is usually located at the front of the undercarriage and it is one of the hardest working parts of the excavator.

It is important to note that there are different types of sprockets. Some sprockets have a bolt-on design, while others are welded directly onto the drive shaft. Additionally, there are also different types of idlers. Some are front idlers that rotate, while others are rear idlers that remain stationary.

Despite their differences, both the idler and sprocket are integral parts of an excavator's undercarriage system. Without these two components, the excavator would not be able to move and carry out its intended functions. It is, therefore, important for excavator owners and operators to ensure that these two parts are properly maintained and replaced if necessary.

In conclusion, the idler and sprocket are two very important, yet distinct parts of an excavator. The idler serves to maintain track tension and support the track chain while the sprocket drives the excavator forward. Understanding these differences can help those who work with heavy machinery to better understand how their excavators work and how to best maintain them for optimal performance.

idler heattreatmnet

FAQ

1. What Is The Delivery Time?

Generally speaking, the delivery time is 20days to 45days.it depend on how many items for a order. But if the whole order are 200 serial track roller(bottom roller, lower roller), the delivery time is within 10days.

2. What Is MOQ For The Order?

Generally speaking, the MOQ is a full container load of 20 feet container. Under this condition, the single cost can be lowered. if customers ask for less full container load. It is also acceptable.

3. How Can You Control Your Quality?

When material come inside our factory, we need to analyze the material cost. And when front idlers and sprocket rims material are casted. We need to analyze the composition to see if the material is qualified or not. When track rollers, carrier rollers and front idlers are being assembled, we need to oil leakage testing. After several parts are heat treated, we need to check the hardness before all are done.And our inspectors will check the sizes at ramdom when parts are being machined or assembled. All of these can guarantee the parts with correct sizes and good quality.

Hot Tags: idler assy excavator, China, best, manufacturers, suppliers, factory, Front Idler PC300 3, Front Idler E305 5, Front Idler PC200 5 PC200 6, Idler For Volvo EC460, Front Idler EX40, Front Idler MS180 3 MS180 8

You Might Also Like

(0/10)

clearall