Quanzhou Sanqi Engineering Machinery Co.Ltd

enLanguage
Caterpillar Bulldozer Parts

Caterpillar Bulldozer Parts

We supply bulldozer parts mainy for komatsu bulldozer and caterpillar bulldozer.
We devoted ourselves to bulldozer parts many years,covering most of the models.
we are expecting to be your long term partner in China.

Product Introduction

Products Description

caterpillar bulldozer parts

The caterpillar bulldozer also called bottom roller and lower roller is used to support the weight of crawler excavators and roll on the track link. It is also used to keep track link to prevent it from lateral slippage. When the excavator steers, track roller force the track assy to skip on the ground.

Track rollers are often in mud, water and just and bear strong impact. Therefore,they are required to be sealed reliably and wear-resisitant.

We will select different material as per different working condition for our track rollers to meet customer requirements and machine precisely and assemble them well to guarantee the hight quality.

bulldozer track roller shaft

Each roller is precision machined to house special high impact low wear bimetal bushings.

bulldozer track roller rock bush

Bimetal bushing of our track roller is based on steel plate which special alloy is sintered on it. It shows high loading ability and high ability of fatigue resistance.

technical requirement

1. Check all parts strictly before assembly and clean them

2. A small amount of oil shall be applied to the mating surface of the shaft sleeve and straight shaft before assembly

3. The floating oil seal ring shall be assembled in pairs, and its sealing surface shall be coated with lubricating oil. The contact surface between O-ring and floating oil seal ring shall not be coated with lubricating grease, and the assembly of floating seal rubber ring shall not be twisted

4. The total assembly force of the floating seal ring shall be 45-50kgf. M, so as to ensure the axial clearance of 0.4-0.9mm after assembly. When turning the wheel body by hand, there is a certain resistance moment, but no jamming

5. After installation, fill in the filtered lubricating oil. The tightening torque of the oil plug is 20 ± 2kgf. M. no leakage is allowed during the inspection

6. The painting color shall comply with jb2299-78

Product Details

Finishing: Smooth

Technique: Forging

Standard: ISO

Place of origin: Fujian,China

Brand name: SQ or GTR

Color: Black,yellow or gray

Surface hardness: HRC-52-HRC59

Heat treatment depth: 8-12mm

Moving type: Crawler-tracked bulldozer

Delivery time: 20-30 days after receiving the advance payment or receiving LC

Packing: Standard seaworthy wooden pallet

Trade term: FOB ,CNF,CIF Xiamen Port,China

Payment: TT ,LC at sight

Product Picture 

bulldozer roller body

bulldozer track roller collar

Our factory 
track roller heattreatment

Heattreatment

track roller welding

Welding

track roller assembly

Assembly

track roller warehouse

Warehouse

 

 

Hot Tags: caterpillar bulldozer parts, China, best, manufacturers, suppliers, factory, TRACK ROLLER R220LC 9S, Track Roller Undercarriage, Tractor Track Roller, Track Roller SK15, Track Roller PC30, Komatsu Track Rollers

You Might Also Like

(0/10)

clearall