Quanzhou Sanqi Engineering Machinery Co.Ltd

enLanguage
D60A-8 Bulldozer Bottom Roller

D60A-8 Bulldozer Bottom Roller

Roller Type:single flange or double flange
Material:50MN,40MN2
Lead time:30days
Pay term:TT
Moq:50pcs

Product Introduction

Products Description

D60A-8 Bulldozer Bottom Roller

A Komatsu bulldozer bottom roller is an essential component in the undercarriage system of a Komatsu bulldozer. This roller supports the weight of the machine as it moves across rough terrain or works on construction sites. The roller is designed to reduce friction and wear between the track chain and the ground, which improves the longevity and performance of the machine.

Komatsu bulldozer bottom rollers are made from high-quality steel and other durable materials that can withstand the harsh conditions of construction sites. These rollers are designed to work seamlessly with other undercarriage components and provide smooth and reliable operation even in the toughest environments.

In addition to supporting the machine's weight and reducing friction, Komatsu bulldozer bottom rollers also help to distribute the load evenly across the track chain. This ensures that the machine is stable and balanced, which is critical for maintaining safe and efficient operation.

Overall, a Komatsu bulldozer bottom roller is a crucial component of a Komatsu bulldozer's undercarriage system. It plays a significant role in supporting the machine's weight, reducing friction, and improving overall performance. When combined with other high-quality components, Komatsu bulldozer bottom rollers help to create a reliable and durable machine that can handle even the toughest construction projects with ease.

bulldozer track roller shaft

D60A-8 Bulldozer Bottom Roller

Collars of Upper rllers are made by ductile iron. It shows exceptional resisitance to shock.

bulldozer track roller rock bush

D60A-8 Bulldozer Bottom Roller

Each rollers is precision machined to house special high impact low wear bimetal bushings.

Technical requirement

1. Before assembly, the sharp angle and burr of the parts shall be removed, and the bore, bearing, oil seal and other parts in the wheel body shall be cleaned.

2. Floating oil seal and other parts shall not be scratched or bruised.

3. The floating seal rubber ring shall not be stained with oil or twisted during assembly.

4. A small amount of oil shall be applied to the pressure fitting surface and floating oil seal fitting surface during assembly.

5. After assembly, inject 700ml of vehicle gear EP oil with clean capacity, and check after 4 hours to ensure there is no leakage.

6. The painting color of the assembly shall be in accordance with the customer's requirements.

Advantages Of Bottom Roller

1 .The design of double-cone sealing and lubrication for life makes the bulldozer lower roller have long life time and perfect performance under any working condition.

2. Bimetal bushing of our bulldozer track roller is based on steel plate which special alloy is sintered on it. It shows high loading ability and high ability of fatigue resistance.

3. Each track roller shell is carefully heat treated to ensure long wear life and stress resistance.

4. Differential type of quenching or through type of quenching heattreatment can ensure certain heat treatment hardness depth and so give good anti-cracking effects.

5. Warm forging treated roller shell gains distinguishing inner material fiber flow distribution architecture.

6.Each lower rollers shaft is machined by the utilization of the most modern technological advances known to the industry, Grinding and finishing methods ensure mirror like finish and tempering with medium to low frequency heat treating equipment guarantees maximum strength.

7.Each bulldozer track roller is precision machined to house special high impact low wear bimetal bushings.

8.Lubrication oil of our bulldozer bottom rollers is selected carefully. It can lubricate shaft and bushing well to lower the wearing utmostly. And it can cool the roller perfectly. Those maximize the inner structure life.

9.Collars of bulldozer lower rollers are made by ductile iron. It shows exceptional resisitance to shock.

Komatsu part number and Models for bulldozer lower rollers Available:

Partnumber:201-30-44000,Model:D20A-5,6,7/D20P-5,6,7/D20PL-6/D20PLL-6/D20Q-5,6,7/D20S-5,6,7/D21A-5,6,7/D21E-6/D21P-5,6,7/D21P-6A/D21P-6B/D21P-6,7/D21S-5,6/D21S-6A/21S-7

Partnumber:111-30-00274,Model:D30A-15,D30S-15/D31A-15,16,17/D31E-18/D31P-16,17,18,20/D31P-16A,17A,20A/D31PL-16,17,18,20/D31PLL-16,17,18,20/D31Q-16,17,18/D31S-15,6,17,18,20/D37E-1,3,5/D37P-1,2,5

Partnumber: 662823C92,Model: D32E/D32P/D38E/D38P

Partnumber: 621481C94,Model: D39E/D39P

Partnumber:131-30-56100,Model:D40A-1,3/D40F-3/D40P-1,3/D40PL-1,3/D40PLL-1,3/D41A-3/D41A-3A/D41E-3/D41P-3/D41Q-3/D41S-3/D45A-1/D45E-1/D45P-1/D45S-1/D50A-16,17/D50F-16,17/D50P-16,17/D50PL-16,17/D50S-16/D53A-16,17/D53P-16,17/D53S-16,17/D55S-2,3/D57S-1/D57S-1B/D58E-1/D58E-1A/D58E-1B/D58P-A/D58P-1B/ D63E-1/D63E-1A

Partnumber:131-30-56200,Model:D40A-1,3/D40F-3/D40P-1,3/D40PL-1,3/D40PLL-1,3/D41A-3/D41A-3A/D41E-3/D41P-3/D41Q-3/D41S-3/D45A-1/D45E-1/D45P-1/D45S-1/D50A-16,17/D50F-16,17/D50P-16,17/D50PL-16,17/D50S-16/D53A-16,17/D53P-16,17/D53S-16,17/D55S-2,3/D57S-1/D57S-1B/D58E-1/D58E-1A/D58E-1B/D58P-A/D58P-1B/D63E-1/D63E-1A

Partnumber:141-30-00577,Model:D60A-6,7/D60E-7,8/D60F-7,8/D60F-7A/D60F-8A/D60P-7/D60PL-7,8/D60S-7,8/D65A-6,7,8/D65P-7,8/D65S-7/8/D66S-1/D68E-1/D68P-1

Partnumber:141-30-00587,Model:D60A-6,7/D60E-7,8/D60F-7,8/D60F-7A/D60F-8A/D60P-7/D60PL-7,8/D60S-7,8/D65A-6,7,8/D65P-7,8/D65S-7/8/D66S-1/D68E-1/D68P-1

Partnumber:14X-30-14100,Model:D65A-8/D65E-7,8/D65E-12/D65EX-12/D65P-12/D65P-8/D65PX-12/D75S-1/D85ESS-2A

Partnumber:14X-30-14200,Model:D65A-8/D65E-7,8/D65E-12/D65EX-12/D65P-12/D65P-8/D65PX-12/D75S-1/D85ESS-2A

Partnumber: 154-30-00505,Model: D80A-12/D85A-12

Partnumber: 154-30-00405,Model: D80A-12/D85A-12

Partnumber:155-30-00127,Model:D75S-3,5/D80A-18/D80E-18/D80F-18/D80P-18/D83E-1/D83P-1/D85A-18/D85A-21/D85E-18/D85E-21/D85P-18/D85P-21/D95S-1/D95S-2/

Partnumber:155-30-00117,Model:D75S-3,5/D80A-18/D80E-18/D80F-18/D80P-18/D83E-1/D83P-1/D85A-18/D85A-21/D85E-18/D85E-21/D85P-18/D85P-21/D95S-1/D95S-2/

Partnumber: 175-30-00489,Model: D135A-1/2/D150A-1/D155A-1/2

Partnumber: 175-30-00499,Model: D135A-1/2/D150A-1/D155A-1/2

Partnumber: 17A-30-00070,Model: D155A-3/D155AX-3

Partnumber: 17A-30-00080,Model: D155A-3/D155AX-3

Partnumber: 178-30-16114,Model: D155C-1/D155S-1

Partnumber: 178-30-16124,Model: D155C-1/D155S-1

Partnumber: 17M-30-00220,Model: D275-2

Partnumber: 17M-30-00230,Model: D275-2

Partnumber: 195-30-00410,Model: D355A-1

Partnumber: 195-30-00420,Model: D355A-1

Partnumber: 195-30-00336,Model: D355A-3/5

Partnumber: 195-30-00346,Model: D355A-3/5

Partnumber: 195-30-01051,Model: D375-1/2/3

Partnumber: 195-30-01061,Model: D375-1/2/3

Partnumber: 198-30-00421,Model: D475-1/2

Partnumber: 198-30-00432,Model: D475-1/2

 

Products parameters
Track roller body type Material Welding type Sprocket type Loading container
Single flange 50MN Friction welding Segment group 20 feet container
Double flange 40MN2 Normal welding Full rim 40 feet container
Product Picture 

bulldozer roller body

bulldozer track roller collar

Our factory 
track roller heattreatment

Heattreatment

track roller welding

Welding

track roller assembly

Assembly

track roller warehouse

Warehouse

 

FAQ

Q: What Is MOQ For The Order?

A: Generally speaking, the MOQ is a full container load of 20 feet container. Under this condition, the single cost can be lowered. if customers ask for less full container load. It is also acceptable.

Q: Are You A Manufacturer Or A Trader?

A: We are a manufacturer. We do forging and casting by ourselves. And our factory is located in Quanzhou city, Fujina, China.

Q: How About The Payment Terms?

A: TT 30 percent deposit,and TT 70percent balance after seeing the scan copy of bill of lading or LC at sight.

Q: How About The Delivery Time?

A: 3-7 days for stock goods,30-45 days for customized product.

Q: How Do You Offer Guarantee?

A: If parts are broken due to manufacturing problem, we will deduct the value for next order amount or offer you brand new one to replce.

Q: Could You Make Customer Logo?

A: Yes,we can make customer logos if it reachec the moq for customer logo order.

Hot Tags: d60a-8 bulldozer bottom roller, China, best, manufacturers, suppliers, factory, Idler For Caterpillar D4D, Front Idler PC20 3, Excavator Front Idler Assy, Track Roller PC400 5 PC400 6 PC400 7 PC400 8, Sprocket Rim DX500, Track Link PC400 6 PC400 7 PC400 8

You Might Also Like

(0/10)

clearall