
D65P-12 Bulldozer Bottom Roller
We supply bulldozer parts mainy for komatsu bulldozer and caterpillar bulldozer.
We devoted ourselves to bulldozer parts many years,covering most of the models.
we are expecting to be your long term partner in China.
Product Introduction
Products Description
D65P-12 bulldozer bottom roller
What is a bulldozer bottom roller? It is a crucial part of a bulldozer that helps to distribute the weight of the machine and maintain its stability. The bottom roller assembly consists of a mounting bracket and a roller wheel which supports the bulldozer's track chain.

D65P-12 bulldozer bottom roller
Warm forging treated roller shell gains distinguishing inner material fiber flow distribution architecture.

D65P-12 bulldozer bottom roller
Each shaft is machined by the utilization of the most modern technological advances known to the industry, Grinding and finishing methods ensure mirror like finish and tempering with medium to low frequency heat treating equipment guarantees maximum strength.
Technical requirement
1. Check all parts strictly before assembly and clean them
2. A small amount of oil shall be applied to the mating surface of the shaft sleeve and straight shaft before assembly
3. The floating oil seal ring shall be assembled in pairs, and its sealing surface shall be coated with lubricating oil. O-ring and floating oil seal ring
The contact surface shall not be coated with grease, and the assembly of floating seal rubber ring shall not be twisted
4. During assembly, pay attention to the oil groove direction of the shaft and the installation plane of the side cover
5. After assembly, ensure that the axial clearance is 0.4-0.7mm. Rotate the wheel body by hand, and feel the resistance moment, but there is no jamming,
6. After installation, fill in the filtered lubricating oil and check that there is no leakage. Then run in for 3-5 minutes to make it run smoothly
7. The painting color shall comply with jb2299-78 or the customer's requirements
Model:D39E-1,D39P-1 Part number: 621481C94
Model:D40A-1/3,D40F-3,D40P-1/3,D40PL-1/3,D40PLL-1/3,D41A-3/3A,D41E-3,D41P-3,D41Q-3,D41S-3,D45A-1,D45E-1,D45P-1,D45S-1, D50A-16/17,D50F-16/17,D50P-16/17,D50PL-16/17,D50S-16,D53A-16/17,D53P-16/17,D53S-16/17,D55S-2/3,D57S-1/1B,D58E-1/1A/1B,D58P-1,D60A-3,D60P-3,D60S-3,D63E-1,D63E-1A Part number: 131-30-56100 for single flange, 131-30-56200 for double flange
Model:D60A-6-7-8,D60E-7/8,D60F-7/8,D60P-7/8,D60PL-7/8,D60S-7/8,D65A-6/7/8,D65E-7/8,D65P-7/8,D65S-7/8,D66S-1,D68E-1,D68P-1,D75A-1, Part number: 141-30-00577 for single flange, 141-30-00587 for double flange
Advantages of bulldozer bottom roller
1. Differential type of quenching or through type of quenching heattreatment can ensure certain heat treatment hardness depth and so give good anti-cracking effects.
2. Warm forging treated bulldozer bottom roller shell gains distinguishing inner material fiber flow distribution architecture.
3.Each bulldozer bottom roller shaft is machined by the utilization of the most modern technological advances known to the industry, Grinding and finishing methods ensure mirror like finish and tempering with medium to low frequency heat treating equipment guarantees maximum strength.
4.Each bulldozer bottom roller is precision machined to house special high impact low wear bimetal bushings.
5.Lubrication oil of our bulldozer top rollers is selected carefully. It can lubricate shaft and bushing well to lower the wearing utmostly. And it can cool the roller perfectly. Those maximize the inner structure life.
Products parameters D65P-12 bulldozer bottom roller
| Track roller body type | Material | Welding type | Sprocket type | Loading container |
| Single flange | 50MN | Friction welding | Segment group | 20 feet container |
| Double flange | 40MN2 | Normal welding | Full rim | 40 feet container |
Packing
9pcs per pallet,several pallets as a pile up to the weight around 3t
12pcs per pallet, several pallets as a pile up to the weight around 3t
15pcs per pallet, several pallets as a pile up to the weight around 3t
20pcs per pallet, several pallets as a pile up to the weight around 3t
Company Information
We are professional manufacturer of undercarriage parts and other related parts of crawler tracked machinery. Our products include excavator lower roller, carrier roller, sprocket rim, front idler, track link etc..they are applicable for world famous brands and Chinese domestic brands like komatsu, hitachi, kobelco, kato, mitusbishi, Kubota, yanmar,Hyundai, doosan,Volvo, case, jcb, sany, xugong, liugong,zoomlion sunward etc..
We produce around 25000pcs of excavator bottom rollers and carrier rollers, around 3000pcs of front and rear idlers,around 2000pcs of sprocket rims and big quantity of other parts mentioned at the above.
Komatsu D65P-12 Vs. D65EX-12 Bulldozer: What are the Differences?
Bulldozers are some of the most important equipment used in various construction projects. These machines can be used to clear and level the ground, push large amounts of soil and rocks, and even move heavy equipment around. Among the many brands of bulldozers available on the market, Komatsu is one of the most reliable and trusted names in the industry. In this article, we'll be comparing two of Komatsu's most popular bulldozers, the D65P-12 and D65EX-12, highlighting their similarities as well as their differences.
Similarities
Let's start by discussing the similarities between both bulldozers. Firstly, they are both designed to offer high-level performance in different working conditions. Both machines have excellent stability and power that enable them to operate on different terrains with ease. They are also solidly built, with a durable undercarriage, a large fuel tank, and an enclosed cab for the operator.
Both bulldozers also have a four-stroke, turbo-charged, and direct-injection engine, which enables them to deliver high power while keeping fuel consumption low. This helps to minimize the running cost of these machines while also reducing their carbon footprint. Additionally, both D65P-12 and D65EX-12 have a horsepower rating of 190, which makes them highly efficient in a variety of construction tasks.
Differences
Now, let's look at the differences between the two bulldozers. Firstly, the D65P-12 is a swamp dozer designed for wetlands, marshes, and other areas with shallow water levels. It has wider tracks and lower ground pressure than the D65EX-12, which gives it better flotation capacity and makes it ideal for working in muddy and swampy areas. On the other hand, the D65EX-12 is designed with standard tracks and is best suited for working in harsh terrains, such as rocky surfaces and slopes.
Another significant difference between both bulldozers is their blade capacity. The D65P-12 has a 4.6 cubic meter blade, while the D65EX-12 has a slightly smaller blade of 4.2 cubic meters. This means that the D65P-12 is more efficient in moving a larger volume of soil and rocks in a shorter amount of time than the D65EX-12.
Finally, the D65EX-12 has more advanced safety features than the D65P-12. It has an automatic transmission system, which adjusts to different loads and working conditions, to ensure maximum safety and performance. Additionally, the D65EX-12 has an integrated GPS system, which enables it to operate efficiently and accurately over long distances.
Conclusion
Both the Komatsu D65P-12 and D65EX-12 are highly efficient bulldozers designed for different environments. While the D65P-12 is ideal for swampy areas, the D65EX-12 is best suited for rocky and tough terrain. They both have many excellent features that make them desirable, but their differences must be taken into consideration when choosing which bulldozer is best for a construction project. At the end of the day, the model that fits the task at hand will provide improved efficiency, cost-effectiveness, and productivity, making these Komatsu bulldozers highly valuable investments for construction companies.
Product Picture


Our factory D65P-12 bulldozer bottom roller

Heattreatment

Welding

Assembly

Warehouse
FAQ
1. Are You A Manufacturer Or A Trader?
We are a manufacturer. We do forging and casting by ourselves. And our factory is located in Quanzhou city, Fujina, China.
2. How Could You Know If Our Parts Are Fitted To Machines?
Please offer us the detailed machine models or mounting sizes.
3. How About The Payment Terms?
TT 30 percent deposit,and TT 70percent balance after seeing the scan copy of bill of lading or LC at sight.
4. What Is The Delivery Time?
Generally speaking, the delivery time is 20days to 45days.it depend on how many items for a order. But if the whole order are 200 serial track roller(bottom roller, lower roller), the delivery time is within 10days.
Hot Tags: d65p-12 bulldozer bottom roller, China, best, manufacturers, suppliers, factory, Side Cutter, Excavator Track Roller, Front Idler PC300 3, Idler For Volvo EC460, Track Adjuster, Carrier Roller SH60
You Might Also Like
Send Inquiry







