Quanzhou Sanqi Engineering Machinery Co.Ltd

enLanguage
D65P-7 Bulldozer Bottom Roller

D65P-7 Bulldozer Bottom Roller

Roller Type:single flange or double flange
Material:50MN,40MN2
Lead time:30days
Pay term:TT
Moq:50pcs

Product Introduction

Products Description

D65P-7 bulldozer bottom roller

What is a bulldozer bottom roller? It is a crucial part of a bulldozer that helps to distribute the weight of the machine and maintain its stability. The bottom roller assembly consists of a mounting bracket and a roller wheel which supports the bulldozer's track chain.

Bulldozers are heavy machines that must be equipped with the right components to maintain their balance and prevent tipping. The bottom roller functions as the base of the track system and works to absorb the shock and vibrations generated by rough terrain. Without a reliable bottom roller, a bulldozer would struggle to navigate difficult surfaces and would be prone to damage and breakdowns.

Overall, the bulldozer bottom roller might be a small part of the machine, but its role is crucial to the overall functioning and longevity of the bulldozer. Ensuring that the bottom roller is maintained and replaced when necessary will help to keep the whole machine running smoothly and efficiently.

bulldozer track roller shaft

D65P-7 bulldozer bottom roller

Collars of track roller are made by ductile iron. It shows exceptional resisitance to shock.

bulldozer track roller rock bush

D65P-7 bulldozer bottom roller

Each track roller shell is carefully heat treated to ensure long wear life and stress resistance.

 

Model:D60A-6-7-8,D60E-7/8,D60F-7/8,D60P-7/8,D60PL-7/8,D60S-7/8,D65A-6/7/8,D65E-7/8,D65P-7/8,D65S-7/8,D66S-1,D68E-1,D68P-1,D75A-1, Part number: 141-30-00577 for single flange, 141-30-00587 for double flange

 

Model:D65A-8,D65E-8,d65E-12,D65EX-12,D65P-12,D65PX-12,D75A-1 ,D85E-SS-2A Part number: 14X-30-14100 for single flange, 14X-30-14200 for double flange

 

Model:D75S-2, Part number: 154-30-00505 for single flange, 154-30-00405 for double flange

 

Model:D75S-3/5,D80A-12/18,D80E-18,D80F-18,D80P-18,D83E-1,D83P-1, D85A-18,D85A-21,D85E-18/21,D85P-18/21,D85S-1/2,Part number: 155-30-00127 for single flange, 155-30-00117 for double flange

 

Model:D85A-12 Part number: 154-30-00505 for single flange, 154-30-00405 for double flnage

Technical requirement

1. All parts shall be cleaned before assembly without any sundries;

2. Apply a small amount of clean oil to the grinding surface of the floating seal ring; ensure the axial direction after assembly

The displacement is 0.3-0.6 mm

3. Carry out the pressure test before oil injection, and there is no air leakage under the pressure of 0.5-0.6mpa;

4. After installation, inject clean sae80w-90 gear oil (the oil volume accounts for about the cavity

90% ~ 95% of the volume;

5. Run it in for 3-5 minutes after refueling to make it operate smoothly;

6. After the surface is clean, spray two coats of antirust paint.

According to the power, there are 4-7 rollers on each side of the crawler bulldozer. The lower limit of power is small, and the upper limit of power is large. When the length of track grounding is fixed, increasing the number of roller can make the grounding pressure uniform and reduce the rolling resistance of track depth. However, increasing the number will inevitably reduce the diameter and increase the rolling resistance of roller on track. Considering these two factors comprehensively, the diameter of roller is generally DZ = (1-2.0) Lt. The distance between the axles LZ = (1.7-2.0)) lt, the distance between the last axle and the driving axle LK = (2.3-2.6) lt, and the position of the front axle shall ensure that the tensioner is adjusted to the final limit position and the buffer spring is compressed to the maximum value without interference. There should be enough clearance between the tooth top of the drive sprocket and the hub of the roller to prevent mud accumulation.

 

Advantages of bulldozer bottom roller

1 .The design of double-cone sealing and lubrication for life makes the top roller have long life time and perfect performance under any working condition.

2. Bimetal bushing of our bulldozer bottom roller is based on steel plate which special alloy is sintered on it. It shows high loading ability and high ability of fatigue resistance.

3. Each bulldozer bottom roller shell is carefully heat treated to ensure long wear life and stress resistance.

4. Differential type of quenching or through type of quenching heattreatment can ensure certain heat treatment hardness depth and so give good anti-cracking effects.

5. Warm forging treated roller shell gains distinguishing inner material fiber flow distribution architecture.

Products parameters
Track roller body type Material Welding type Sprocket type Loading container
Single flange 50MN Friction welding Segment group 20 feet container
Double flange 40MN2 Normal welding Full rim 40 feet container
Product Picture     D65P-7 bulldozer bottom roller

bulldozer roller body

bulldozer track roller collar

Our factory     D65P-7 bulldozer bottom roller
track roller heattreatment

Heattreatment

track roller welding

Welding

track roller assembly

Assembly

track roller warehouse

Warehouse

 

FAQ

1. Are You A Manufacturer Or A Trader?

We are a manufacturer. We do forging and casting by ourselves. And our factory is located in Quanzhou city, Fujina, China.

2. How Could You Know If Our Parts Are Fitted To Machines?

Please offer us the detailed machine models or mounting sizes.

3. How About The Payment Terms?

TT 30 percent deposit,and TT 70percent balance after seeing the scan copy of bill of lading or LC at sight.

Hot Tags: d65p-7 bulldozer bottom roller, China, best, manufacturers, suppliers, factory, Front Idler SH200 SH280, Mini Front Idler SK042, Sprocket Rim EX60 1, Track Roller Group, Idler For KOBELCO SK350 8, Track Roller SK350 8

You Might Also Like

(0/10)

clearall