Quanzhou Sanqi Engineering Machinery Co.Ltd

enLanguage
Mini Excavator Tread Replacement Parts

Mini Excavator Tread Replacement Parts

Color:black,yellow,blue,gray
Mini track roller type:inner flange,outter flange
Bushing type:bearig,bimetabl bushing
mounting type:shaft bolt type,collar type

Product Introduction

Products Description

mini excavator tread replacement parts

There are two types of excavators commonly used in the construction industry: the wheeled excavator and the tracked excavator. Both are powerful machines with unique features, but their differences make them better suited for different types of jobs.

Wheeled excavators are designed for use on hard, level surfaces such as roads and pavements. They are often used for urban construction projects, where they can be easily transported between job sites. Because they are equipped with tires or rubber tracks, they are relatively quiet and produce less vibration than their tracked counterparts, making them ideal for working in noise-sensitive areas.

Tracked excavators, on the other hand, are better suited for rough terrain and uneven ground. They are often used on construction sites where the ground is soft or muddy, as their treads provide excellent traction and stability. They are also capable of working on steep inclines, making them ideal for excavating hillsides or working in areas with steep slopes.

Despite their different applications, both wheeled and tracked excavators have their advantages. Wheeled excavators are more maneuverable and can be driven faster than tracked excavators, making them perfect for working in tight spaces. They are also more fuel-efficient, requiring less energy to operate than their tracked counterparts, which can save on operating costs in the long run.

Tracked excavators, on the other hand, offer more power and stability than wheeled excavators. They are capable of lifting heavier loads and operate better in muddy or slippery conditions. They also have a wider range of motion, making them ideal for tasks that require a high degree of precision, such as digging trenches or building foundations.

In conclusion, both wheeled and tracked excavators have their unique benefits and drawbacks, and the choice of which to use largely depends on the specific nature of the job at hand. However, when used appropriately, both types of excavators are powerful tools that can help get the job done quickly and efficiently.

track roller components
mini excavator tread replacement parts

Each mini excavator rollers is precision machined to house special high impact low wear bimetal bushings.

track roller bimetal bushing
mini excavator tread replacement parts

Differential type of quenching or through type of quenching heattreatment can ensure certain heat treatment hardness depth and so give good anti-cracking effects.

Models available:

CAT:E301.1/E301.5/E301.5CR/E301.6/E301.8/E302/E302.5/E303/E303.5CR/E303.5CCR/E304/E304CR/E305.5/E306/E307/E55/E70B

KOMATSU:PC08/PC10/PC10MR/PC10UU/PC12/PC15/PC15UU/PC18/PC18MR/PC20/PC20UU/PC20MR/PC30/PC35UU/PC35MR/PC40/PC40MR/PC50/PC50UU/PC55/PC60/PC60U/PC60-7

HITACHI:EX12/EX15/EX15U/EX17/EX20/EX22/EX25/EX27/ZX27U/EX30/EX33/EX35/EX35U/EX33U/EX40/EX45/ZX40U/EX50/EX55/EX60-1/EX60-2/EX60-3/EX70/EX75/ZX15/ZX17/ZX25/ZX20/ZX30/ZX35U/ZX40/ZX48UZX50/ZX55/ZX60/AX30/AX40/AX35

KOBELCO:SK15/SK015SR/SK015/SK20/SK020/SK025/SK025SR/SK030/SK35/SK035SR/SK040/SK40SR/SK50/SK55/SK50SR/SK60-1.2.3/SK60-5/SK60-C/SK60-8/SK75

technical requirement

1. All parts shall be thoroughly cleaned before assembly.

2. Before assembly, apply a small amount of butter to various rubber rings.

3. Apply a small amount of oil on the contact surface of floating seal ring.

4. After assembly, the wheel shall be able to rotate by hand, with an axial displacement of 0.3-0.85.

5. The total pressure after assembly is about 45-50kg.

6. Add gear oil sae80w-90. Lubricate about 200ml.

7. Before oil filling, use 0.4MPa air pressure for sealing

There shall be no air leakage in sealing test.

8. Bolt tightening torque: 44.1-58.8n. M.

9. Tightening torque of oil plug: 127.6-166.7n. M.

FAQ
1. What Kind Terms Of Payment Can Be Accepted?
T/T,L/C, D/A, D/P is accepted.
2. What About The Delivery Time?
20-45 days after receiving the down.
3. Packaging?
Packed on fumigating pallet with steel strip.
4. Delivery Port?
Main port: Dalian, xiamen, ningbo, China
5. What About The Warranty Time?
Excavator: 6months or 2000 working hours
6. Are You A Factory Or A Trade?
We are a factory with casting and forging
7. Where Is Your Factory?
The factory is mainly distributed in fujian province, China

Products parameters
Roller body type Bushing type Mouting type Color
inner single flange bearing shaft type black
outter flange bimetal bushing collar type yellow
triple flange     gray
track Roller Assembly And painting

track roller assembly

track roller painting

More about Products
mini track roller forging

track roller body forging

mini track roller heattreatment

track roller body heattreatment

mini track roller assembly

track roller assembly

mini track roller packing

track roller packing

 

 

Hot Tags: mini excavator tread replacement parts, China, best, manufacturers, suppliers, factory, Track Roller DH55, Komatsu Track Rollers, Mini Track Roller PC40 7, Track Roller E70, Track Roller B12, Track Roller PC75UU

You Might Also Like

(0/10)

clearall