
Parts in Bulldozer
Roller Type:single flange or double flange
Material:50MN,40MN2
Lead time:30days
Pay term:TT
Moq:50pcs
Product Introduction
Products Description
parts in bulldozer
Bulldozers are powerful machines capable of moving heavy materials with ease, but like any machine, they require routine maintenance and repairs to keep them running efficiently. Proper maintenance and repair for bulldozers can help prolong their lifespan and ensure that they continue to perform optimally.
To begin with, bulldozers require regular fluid checks and oil changes. Oil changes are necessary to ensure that the engine runs smoothly and to avoid any wear and tear that could negatively affect the machine's performance. Additionally, it's important to check the hydraulic system and ensure that there are no leaks or damage to any of the hoses. Any damaged hoses must be replaced immediately to reduce the risk of further damage to the system.
Aside from routine maintenance, proper repair of bulldozers is essential when something goes wrong. Working with trained professionals who have experience repairing bulldozers is essential because they know what parts to replace and how to fix any issues. They will also be able to advise you on how to avoid future problems and maintain your bulldozer to keep it in top condition.
While bulldozers are robust machines, they can fall victim to wear and tear over time, and parts may need to be replaced. A qualified technician will be able to identify when parts such as gaskets, filters, and belts need to be replaced, and they will be able to provide the necessary repair services promptly.
In addition, it's crucial to only use high-quality parts when repairing a bulldozer. This ensures that the machine functions correctly and minimizes the risks of breakdowns in the future. High-quality parts are also typically more durable, which means they need to be replaced less often, helping you save on maintenance costs over time.
In conclusion, maintaining and repairing your bulldozer is necessary for optimal performance and a long lifespan. By following a routine maintenance schedule and consulting with trained professionals when needed, you can keep your machine running at optimal performance levels for years to come. So don't hesitate to invest time and effort into your bulldozer's maintenance and repair; the benefits you will reap are well worth it!

Collars of Upper rllers are made by ductile iron. It shows exceptional resisitance to shock.

Each rollers is precision machined to house special high impact low wear bimetal bushings.
Model:D65A-8,D65E-8,d65E-12,D65EX-12,D65P-12,D65PX-12,D75A-1 ,D85E-SS-2A Part number: 14X-30-14100 for single flange, 14X-30-14200 for double flange
Model:D75S-2, Part number: 154-30-00505 for single flange, 154-30-00405 for double flange
Model:D75S-3/5,D80A-12/18,D80E-18,D80F-18,D80P-18,D83E-1,D83P-1, D85A-18,D85A-21,D85E-18/21,D85P-18/21,D85S-1/2,Part number: 155-30-00127 for single flange, 155-30-00117 for double flange
Model:D85A-12 Part number: 154-30-00505 for single flange, 154-30-00405 for double flnage
technical requirement
1. Check all parts strictly before assembly and clean them
2. A small amount of oil shall be applied to the mating surface of the shaft sleeve and straight shaft before assembly
3. The floating oil seal ring shall be assembled in pairs, and its sealing surface shall be coated with lubricating oil. O-ring and floating oil seal ring
The contact surface shall not be coated with grease, and the assembly of floating seal rubber ring shall not be twisted
4. During assembly, pay attention to the oil groove direction of the shaft and the installation plane of the side cover
5. After assembly, ensure that the axial clearance is 0.4-0.7mm. Rotate the wheel body by hand, and feel the resistance moment, but there is no jamming,
6. After installation, fill in the filtered lubricating oil and check that there is no leakage. Then run in for 3-5 minutes to make it run smoothly
7. The painting color shall comply with jb2299-78 or the customer's requirements
FAQ
1. Could You Make Customer Logo?
Yes,we can make customer logos if it reach the moq for customer logo order.
2. If We Don’t Have Drawings, Could We Develop A New Item?
Yes, you can offer us the main dimension. Then we can compare with our ready products and make a drawing for your checking.
3. Could We Be Your Exclusive Dealer?
Yes,our policy is that we will not let our customer to compete at the same place.
4. Are You A Manufacturer Or A Trader?
We are a manufacturer. We do forging and casting by ourselves. And our factory is located in Quanzhou city, Fujina, China.
Products parameters
| Track roller body type | Material | Welding type | Sprocket type | Loading container |
| Single flange | 50MN | Friction welding | Segment group | 20 feet container |
| Double flange | 40MN2 | Normal welding | Full rim | 40 feet container |
Product Picture


Our factory

Heattreatment

Welding

Assembly

Warehouse
Hot Tags: parts in bulldozer, China, best, manufacturers, suppliers, factory, Track Roller For HITACHI EX60 2, KTM Track Roller, bottom roller D7G for bulldozer, Kobelco Track Roller, Track Roller SH300 For SUMITOMO, Track Roller SK15
You Might Also Like
Send Inquiry







