Quanzhou Sanqi Engineering Machinery Co.Ltd

enLanguage
Vio15 Excavator Lower Roller

Vio15 Excavator Lower Roller

Machine type:crawler tracked excavator
Material:50MN
Guarantee:6months

Product Introduction

vio15 excavator lower roller

INTRODUCTION OF PRODUCTS:

 

More excavator lower roller numbers can make the ground pressure of the track more uniform, so that walking on the wet and soft soil can reduce the subsidence, but on the other hand, because the length of the track is certain, more roller numbers, each diameter must be small, which increases the rolling resistance.
Roller bearings are commonly used (such as iron-based PM oil bearing), but rolling bearings are also used. No matter which kind of bearing is used, it is necessary to prevent mud water from entering.

The rim of the roller shall be wear-resistant, generally made of 45# steel, and the hardness of the rim surface after quenching shall not be lower than hrc53.

 

vio15 excavator lower roller

According to the power, there are 4-7 rollers on each side of the crawler bulldozer. The lower limit of power is small, and the upper limit of power is large. When the length of track grounding is fixed, increasing the number of roller can make the grounding pressure uniform and reduce the rolling resistance of track depth. However, increasing the number will inevitably reduce the diameter and increase the rolling resistance of roller on track. Considering these two factors comprehensively, the diameter of roller is generally DZ = (1-2.0) Lt. The distance between the axles LZ = (1.7-2.0)) lt, the distance between the last axle and the driving axle LK = (2.3-2.6) lt, and the position of the front axle shall ensure that the tensioner is adjusted to the final limit position and the buffer spring is compressed to the maximum value without interference. There should be enough clearance between the tooth top of the drive sprocket and the hub of the roller to prevent mud accumulation.

TRACK ROLLER BODY AND SHAFT

Models Available For Yanmar Excavators:

VIO15,VIO17,VIO18,VIO20,VIO30-1,VIO30-2,VIO35,VIO40-1,VIO40-2,VIO50-2,VIO50-6,VIO70,VIO75,VIO55-2,VIO55-6,B17,B27,B37,B50 ETC..

FAQ

1. What Is Your Terms Of Packing?
Generally, will pack in poly wood pallet. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.

2. How Can I Be Sure The Part Will Fit My Excavator?
Give us correct model number/machine serial number/ any numbers on the parts itself. Or measure the parts give us dimension or drawing.

3. Could We Visit The Factory?
Yes, our factory will warmly welcome you to visit us.

Hot Tags: vio15 excavator lower roller, China, best, manufacturers, suppliers, factory, Sprocket Rim JS200, Front Idler D6D, Track Roller HD720 For Kato, Sprocket Rim EX1100, Track Link SK100 SK120 SK100 3 SK120 3, Front Idler VIO35 2

You Might Also Like

(0/10)

clearall