
Vio35 Excavator Bottom Roller
It also called mini bottom roller and mini lower roller is used to support the weight of crawler excavators and roll on the track link. It is also used to keep track link to prevent it from lateral slippage. When the excavator steers, track roller force the track assy to skip on the ground.
Product Introduction
vio35 excavator bottom roller
Production description
Mini excavator bottom roller also called mini bottom roller and mini lower roller is used to support the weight of crawler excavators and roll on the track link. It is also used to keep track link to prevent it from lateral slippage. When the excavator steers, track roller force the track assy to skip on the ground.
Structure of vio35 excavator bottom roller

Sizes of vio35 excavator bottom roller

Technical requirements:
1. Before installation, remove the slag on the surface of each part and clean it
2. Install the floating oil seal ring correctly. The surface is coated with pure oil film, and the O-ring shall not be twisted or skewed
3. The assembly must pass the sealing test without air leakage under the pressure of 0.6MPa
4. Each filling hole must be filled with diesel engine oil ecc40
5. After 6 minutes running in test, the manually rotating wheel body shall be light without jamming
6. Degrease the outer surface and spray two coats of antirust paint
Models Available For Yanmar Excavators:
VIO15,VIO17,VIO18,VIO20,VIO30-1,VIO30-2,VIO35,VIO40-1,VIO40-2,VIO50-2,VIO50-6,VIO70,VIO75,VIO55-2,VIO55-6,B17,B27,B37,B50 ETC..

Bucket Teeth Supplier
FAQ
1. What Is The Percent Of Your Parts For Overseas Market?
70percent of our parts are for overseas market.
2. Is There Any Guarantee Of Your Parts?
There are 6 months guarantee time for excacavar parts under normal working conditions and 3months guaranteet tiem for bulldozer parts under normal working conditions.
3. How Do You Offer Guarantee?
If parts are broken due to manufacturing problem, we will deduct the value for next order amount or offer you brand new one to replce.
4. Could You Make Customer Logo?
Yes,we can make customer logos if it reach the moq for customer logo order.
5. If We Don't Have Drawings, Could We Develop A New Item?
Yes, you can offer us the main dimension. Then we can compare with our ready products and make a drawing for your checking.
6. Could We Be Your Exclusive Dealer?
Yes,our policy is that we will not let our customer to compete at the same place.
Hot Tags: vio35 excavator bottom roller, China, best, manufacturers, suppliers, factory, carrier roller pc100 3 pc120 3 pc100 5 pc120 5, Sprocket Rim PC200 5 PC200 6 PC200 7 PC200 8, Track Roller Group, Swamp Track Shoe Assy, Front Idler EX30, Front Idler D85
You Might Also Like
Send Inquiry







