Excavators are In China
China's excavator production started relatively late, since 1954, Fushun excavator factory produced the first bucket capacity of 1m-sup3; mechanical single bucket excavator has generally experienced three stages: mapping imitation, independent research and development, development and improvement.
In the early days of the founding of New China, the history of excavator production in China began with the mapping imitation of the former Soviet Union's W501.W502.W1001.W1002 and other mechanical single bucket excavators in the 1930s and 1940s. Due to the need of national economic construction at that time, more than ten excavator factories were established successively. Since 1967, China has independently developed hydraulic excavators. The early successful products include WYl00 of Shanghai Construction Machinery Factory, W4-60 of Guiyang Mining Machinery Factory and WY60 excavator of Hefei Mining Machinery Factory. Then came the WYl60 excavator of Yangtze River Excavator Factory and the WY250 excavator of Hangzhou Heavy Machinery Factory. They have taken an extremely important step for the formation and development of China's hydraulic excavator industry.
By the end of the 1980s, there were more than 30 excavator factories in China, with more than 40 models. A series of medium and small hydraulic excavators have been formed, with bucket capacity ranging from 0.1 to 2.5 cubic metres and 12 grades and more than 20 models. They also produce 0.5-4.cubic metres and large mining single bucket excavators with mechanical transmission of 10 cubic metres and 12 cubic metres, 1 cubic metre tunnel excavators, 4 cubic metres long arm excavators, 1,000 cubic metres/h excavators, etc. A marine hydraulic excavator with bucket capacity of 0.25 cubic metres was developed, with bucket capacity of 0.4 cubic metres, 0.6 cubic metres, 0.8 m³, and amphibious excavators. Generally speaking, the production of excavators in China is small and dispersed in batches, and there is a big gap between the production technology and product quality of excavators and the international advanced level.
Since the reform and opening up, we have actively introduced, digested and absorbed foreign advanced technology to promote the development of China's excavator industry. Among them, Guiyang Mining Machinery Factory, Shanghai Construction Machinery Factory, Hefei Mining Machinery Factory and Yangtze River Excavator Factory introduced the manufacturing technology of A912.R912.R942.A922.R922.R962.R972.R982 hydraulic excavator of Liebherr Company, Germany, respectively. Later years, Hangzhou Heavy Machinery Factory introduced the production technology of H55 and H85 hydraulic excavators from Demag, Germany, and Beijing Construction Machinery Factory introduced the manufacturing technology of RH6 and MH6 hydraulic excavators from 0&K, Germany. At the same time, Shandong Bulldozer General Factory (whose excavator production base was renamed Shan Reconstruction Machinery Co., Ltd., including STRONG and JCM brands), Yellow River Construction Machinery Factory, Jiangxi Changlin Machinery Factory and Shandong Linyi Construction Machinery Factory jointly introduced PC100, PC120.PC200, PC220.PC300 and PC400 from Komatsu Production Institute of Japan. A complete set of manufacturing technology for hydraulic excavators (except engines). Through the digestion, absorption and transplantation of imported technology for several years, these factories have comprehensively raised the performance index of domestic hydraulic excavator products to the international level in the 1980s, and the output has also increased year by year. Due to the increasing and diversified demand for hydraulic excavators in China, the adjustment of product structure in state-owned and medium-sized enterprises has led some manufacturers in other mechanical industries to join the hydraulic excavator industry.
Industry insiders pointed out that China's single bucket hydraulic excavators should be developed in the direction of full hydraulic pressure; bucket capacity should be controlled at 0.1-15 m-sup3 while for large and multi-bucket excavators, due to the high requirements of manufacturing and assembling accuracy of hydraulic components and poor maintenance conditions in construction site, mechanical excavators are still the main type. The electro-hydraulic control technology should be studied and applied to realize the automation of hydraulic excavator operation.
Since the late 1960s, China began to develop excavator products. After 40 years, especially more than 30 years of reform and opening up, China's excavator manufacturing industry has developed rapidly. According to the data of the National Bureau of Statistics, in 2010, 252 Enterprises above the scale of excavator manufacturing industry in China achieved sales of 169.785 billion yuan and sales profits of 25.367 billion yuan, totaling 21.406 billion yuan, an increase of more than 80% year on year.
China's excavator market is increasing at an average rate of 30%, making it one of the largest market in the world. From the perspective of development, China is in the peak period of infrastructure construction in road traffic, energy and water conservancy, urban construction and other aspects. The market demand for excavators is increasing year by year. In 2010, the actual cumulative sales of excavators in China exceeded 165,000 units, an increase of 74.5% over the same period of last year.
At the end of 2010, major domestic enterprises have expanded the production capacity of excavators, and other enterprises have opened up series of excavators, trying to drive the profit growth of enterprises through the rapid growth of the excavator market. In fact, considering both risk factors and benefits, bank credit is not active in promoting the construction of security housing, which indirectly led to the contraction of construction machinery market sales in the second quarter of 2011. In May 2011, the domestic sales of excavators dropped by 12.4% compared with the same period last year, and the total sales of excavators in January-May were 115589, up 38.1% compared with the same period last year, down by 12 percentage points compared with January-April.
Data show that the market share of domestic brands increased further to 37% in January-May 2011. Sany Heavy Industry, which has the highest production capacity of excavators in China, has reached the scale of annual production and sales of tens of thousands of units, while the top four in the industry have reached the level of 4000 units per year or more. Other firms are also enlarging their capacity at a fairly strong rate. In the next stage, the squeeze of domestic brand excavators on the market share of imported machines and second-hand mobile phones may become normal.
According to the data disclosed online by construction machinery, as of September 2014, sales of mini excavators under 6 tons totaled 1006 units, of which foreign brand market share was 55.0%, domestic brand market share was 45.0%. In addition, the sales volume of excavators above 6 tons is 3139, the market share of foreign brand is 61.0%, and that of domestic brand is only 39.0%. According to Sany Heavy Industry, from 2011 to 2013, the domestic market share of the company's excavators reached 11.56%, 15.8% and 13.7% respectively, surpassing Carter and ranking first in the industry. In the first half of this year, its market share again exceeded 15%, insiders believe that the company won the first place in this year, to achieve the "four-year crown" is no doubt.
Overall, the domestic ownership of excavators is low, but the product price is high. Financing lease or bank mortgage is the main mode of sales. Once credit is relaxed, excavator sales will be the best product to rebound. It can be predicted that in 2011-2013, with the recovery of the world's economy and the acceleration of real estate and urbanization construction, the sales of each tonnage excavator will continue to grow, excluding uncertainties, and the growth of each tonnage excavator will exceed 15% in 2011-2013.
With the increasing competition in excavator manufacturing industry, mergers and acquisitions and capital operation among large excavator manufacturing enterprises are becoming more frequent. Domestic excellent excavator manufacturing enterprises pay more and more attention to the research of industry market, especially on the industry development environment and product buyers. Because of this, a large number of domestic excellent excavator brands have risen rapidly, and gradually become the leader in the excavator manufacturing industry in China and even in the world!







