How to maintain the excavator undercarriage parts?
Feb 24, 2020
I often hear from my friends that there are oil leaks from the excavator's roller, broken carrier chain wheel, and inconsistent tightness of the weak track, all of which are related to the four wheel area of the excavator. The four-wheel area is directly related to the working performance and walking performance of the excavator. Maintenance is the key to the excavator's walking speed.
1、Track Roller
In the work, the roller shall not be immersed in muddy water for a long time.
After the completion of the work every day, the single track shall be propped up, and the traveling motor shall be driven to remove the dirt, gravel and other debris on the track.
During construction in winter, it is necessary to keep the roller dry, because there is a floating seal between the outer wheel and the shaft of the roller. If there is water, ice will form at night. When the excavator is moved in the next day, the seal will be scratched and oil leakage will occur.
The damage of the roller will cause many faults, such as walking deviation, walking weakness, etc.
2、 Carrier Roller
The carrier roller is located above the X-frame to keep the straight-line movement of the chain rail. If the carrier roller is damaged, the track chain rail will not keep straight.
The carrier chain wheel is a one-time injected lubricating oil. If there is oil leakage, it can only be replaced with a new one. During the work, try to avoid the roller soaking in muddy water for a long time. At ordinary times, keep the X-frame bevel platform clean, and don't let the accumulation of mud and gravel hinder the rotation of the carrier chain wheel too much.
3、 Idler
The idler is located at the front of the X-frame, which is composed of the idler and the tension spring installed inside the X-frame.
In the process of operation and walking, keep the guide wheel in front, so as to avoid the abnormal wear of the chain rail, and the tension spring can also absorb the impact brought by the road surface in the work and reduce the wear.
4、 Drive sprocket rim
The driving wheel is located at the rear of the X-frame, because it is directly fixed and installed on the X-frame, without shock absorption function. If the driving wheel moves forward, it will not only cause abnormal wear to the driving ring gear and the chain rail, but also have adverse effects on the X-frame. The X-frame may have early cracking and other problems.
The guard board of the traveling motor can protect the motor and some mud and gravel will enter the internal space, which will wear the oil pipe of the traveling motor. The water in the mud will corrode the joint of the oil pipe, so the guard board should be opened regularly to clean up the dirt inside.
5.Track
The track is mainly composed of track shoes and chain links, and the track shoes are divided into standard shoes and extension shoes. Standard plate is used for earthwork condition, and extension plate is used for wetland condition.
In the mine, the wear of the track shoes is the most serious. When walking, the gravel sometimes gets stuck in the gap between the two plates. When it turns to contact with the ground, it will squeeze the two plates, and the track shoes are prone to bend and deform. Walking for a long time will also lead to the cracking of the bolt fixing part of the track shoes.
The chain rail link is in contact with the driving ring gear and driven by the ring gear to rotate. Too tight track tension will cause early wear of chain link, ring gear and guide wheel. Therefore, according to the different construction road conditions, it is necessary to adjust the track tension.
matters needing attention:
Excavator is a high-tech precision equipment combined with "electro-mechanical and hydraulic". When repairing, it requires not only rich experience of maintenance technician, but also precise equipment calibration; in order to avoid repeated bad repair of excavator, please select a regular maintenance factory with rich maintenance experience and complete equipment.
Excavator maintenance costs tens of thousands of thousands of times. In order to reduce the risk of repeated maintenance waste of time and money, please choose the excavator repair manufacturer that has signed the agreement with the owner.







