The Correct Use and Maintenance Method of Five Parts of Excavator
Correct maintenance of the excavator's five parts can keep the excavator in good working condition and improve the service life of the excavator, which is a very important thing!
first
Engine part
Oil and oil filter elements must be replaced by the original parts in accordance with the stipulated maintenance cycle.
Diesel oil should be supplied by regular gas stations as far as possible. It is better to filter before adding it.
Put water at the bottom of the diesel tank and at the oil-water separator every day before starting construction.
Air filter element is often checked.
Do not use idle work for a long time in order to save fuel and prevent carbon deposition.
Check the water tank pump every day to prevent water leakage, so as not to cause engine high temperature or cylinder flushing.
Second
Hydraulic walking and rotating system
Replace the hydraulic oil, oil return filter core and pilot filter core according to the specified maintenance cycle, and pay attention to whether there are iron and copper chips adsorbed on the filter core. When using crusher, deterioration and deterioration of hydraulic oil are accelerated, and replacement cycle should be shortened.
No long-term oil shortage. After replacing hydraulic oil or hydraulic components, pay attention to discharging air. Waterproof, do not involve in deepwater operations, do not wash electrical appliances directly with water when cleaning.
Rotary reducer and walking reducer change gear oil periodically.
Third
electrical system
Waterproof, do not involve in deepwater operations, do not wash electrical appliances directly with water when cleaning.
Do not store sundries in the battery box, especially metal tools, which can easily cause fire.
Do not replace insurance with wire and copper wire, nor with insurance of substandard specifications.
When excavator is parked for a long time, the battery line should be dismantled to prevent feeding.
Instruments, computer boards, safe boxes, sensors, solenoid valves and bus parts prevent rainwater.
Fourth
undercarriage and for wheels
Regular maintenance and inspection of the four wheels means sprcoket rim, idler roller, track roller, carrier roller and track chain, and soil cleaning.
The pin part should pay attention to cleaning up soil and impurities and adding butter. During wading operation, when water overflows the revolving gear ring, pay attention to replacing butter in the revolving gear ring.
Pay attention to the rust prevention of cylinder rod.
When the excavator is parked for a long time, the exposed metal part is coated with butter to prevent rust.
Fifth
Arm, hydraulic cylinder, bucket part
Check pin bolts for loosening, falling off and missing every day, and tighten them in time.
Check the structure for cracks and deformations every day. Pay attention to the surrounding environment when parking excavators, and park on solid, smooth and hard ground.
When the bucket is parked, the cylinder is completely recovered and the bucket falls to the ground to prevent the cylinder from being hit.
Attention should be paid to prevent scratches and oil leakage of the piston rod of the cylinder.
Tooth tip of bucket teeth base, loosening pin bushing of connecting rod H frame, loosening pin bushing of arm and swing support







