What's wrong with travel device? You have to look at these reasons.
Running deviation of excavator refers to the inconsistency of walking speed between left and right crawlers when excavator moves, which is a common fault in the process of using excavator. Running deviation seriously affects the efficiency of work, and must be repaired in time. Let's see the reasons for running deviation.
The tension of both sides of the track is different. This is one of the many reasons for walking deviation that can be determined by naked eye observation. In this case, the crawler tension should be adjusted and butter lubricated in time.
Aging and damage of sealing ring of central rotary joint. Because impurities are mixed into the hydraulic oil, impurities enter the sliding surface of the central rotary joint, which causes excessive wear and tear of the sealing ring and decreases the sealing effect, resulting in hydraulic oil leakage, and the pressure of the walking hydraulic motor on one side decreases, resulting in running deviation.
The parking brake oil circuit of one track can not be unloaded. Because the balance valve in the brake oil circuit is blocked by foreign bodies, the valve core can not move, and the flow of hydraulic oil is blocked, so that the walking hydraulic motor is in braking state and can not rotate, resulting in running deviation. In this case, the balance valve should be thoroughly cleaned, and foreign bodies should be avoided, so that the balance valve maintains normal switching.
Oil leakage of safety valve of walking motor on one side of track. Oil leakage of safety valve leads to low pressure in the running pipeline and insufficient rotating driving force of hydraulic motor, resulting in running deviation.
Hydraulic pump produces too low pressure. Due to excessive wear and stuck plunger of hydraulic pump, hydraulic oil leakage or pump oil capacity is weakened, resulting in low pressure of the whole hydraulic oil circuit, slow speed of hydraulic motor and running deviation.
The traveling proportional valve of one side crawler is damaged. The function of proportional valve is to output the corresponding control oil pressure according to the size of the control stroke, so that the main valve can produce different amount of movement, and finally control the speed of the working device. If the internal damage of proportional valve, the movement of valve core is blocked, which directly affects the control function of the valve body, and ultimately affects the speed of the walking motor.
The overflow valve of the walking motor on one side of the track is damaged. As a kind of protection device, relief valve can remove the high pressure in hydraulic motor in time when the action is impacted by external force, so as to protect the relevant components from being damaged. Because the overflow valve in the walking motor is damaged, the pressure in the oil circuit is reduced, resulting in the weakness of the walking motor.
The main valve of one side crawler is damaged and the movement of the valve core is blocked, which reduces the output oil pressure of the pump body, and the pressure is not enough to drive the walking motor to rotate normally.







