Product Introduction
Front Idler PC200-3
Production introduction
The Idler is used to guide the track to rotate correctly to prevent track deviation and detailment.Most of idlers also act as track rollers.this can increase the contact area between the track and the ground and reduce the grounding pressure.the surface of shovel front idler is made into a smooth surface and the middle arm ring acts as the guide.and the the torus on both sides support the track link.The smaller the distance between the idler and the nearest track roller,the better guidance.
Structure of front idler pc200-3:
Heattreatment of idler roller pc200-3:
Painting of idler group pc200-3:
Advantages of idler assy pc200-3:
Maximum strength
The idler roller shaft is machined by the utilization of the most modern technological advances known to the industry. Grinding and finishing methods ensure a mirror like finish and tempering with medium to low frequency heat treating equipment guarantees maximum strength.
Cost saving service life
The heavy profiles of idler roller rims are carefully heat treated in depth for extra service life.
Precision care
Each front idler is precision machined to house special high impact low wear bimetallic bushings.
Model of idler assy:
| KOMATSU | |||||||
| PC20UU | PC30UU | PC40UU | PC50UU | PC75UU | PC30-1 | PC30-7 | PC30MR |
| PC20-3 | PC20-5 | PC20-6 | PC75-3 | PC100-3 | PC71 | PC90 | PC100-1 |
| PC20-7 | PC20 | PC30-3 | PC30-5 | PC30-6 | PC40-5 | PC40-6 | PC40-7 |
| PC45 | PC45-2 | PC50 | PC55 | PC60-1 | PC60-3 | PC60-5/6 | PC60-7 |
| PC75 | PC80 | PC100-5 | PC120-2 | PC120-6 | PC130 | PC130-7 | PC200 |
| PC200-1 | PC200-2 | PC200-3 | PC200-5/6 | PC200-7 | PC200-8 | PC210-6 | PC220-1 |
| PC220-3 | PC220-6 | PC220-7 | PC220-8 | PC240-3 | PC270-7 | PC202B | PC220LC-6 |
| PC220LC-8 | PC240 | PC300 | PC300-3 | PC300-5/6 | PC300-7 | PC300-7K | PC300LC-7 |
| PC350-6/7 | PC400 | PC400-3 | PC5400-5 | PC400-6 | PC400LC-7 | PC450-6 | PC450-7 |
| PC600 | PC650 | PC750 | PC800 | PC1000-1 | PC1100 | PC1250 | PC2000 |
FAQ
1. Are you a manufacturer or a trader?
We are a manufacturer. We do forging and casting by ourselves. And our factory is located in Quanzhou city, Fujina, China.
2. How about the payment terms?
TT 30 percent deposit,and TT 70percent balance after seeing the scan copy of bill of lading or LC at sight.
3. What is MOQ for the order?
Generally speaking, the MOQ is a full container load of 20 feet container. Under this condition, the single cost can be lowered. if customers ask for less full container load. It is also acceptable.
Hot Tags: front idler pc200-3, China, best, manufacturers, suppliers, factory, Excavator Front Idler Group, Carrier Roller, Front Idler PC30, Mini Digger Front Idler, Track Crane Idler, Front Idler ZAX200 5G
You Might Also Like
Send Inquiry
