Quanzhou Sanqi Engineering Machinery Co.Ltd

enLanguage
B50 Excavator Track Roller

B50 Excavator Track Roller

Material:50MN
Hardness:HRC52-HRC58
Guarantee:3months

Product Introduction

B50 excavator track roller

PRODUCTION INTRODUCTION:

The excavator track roller is fixed under the wheel frame with screws to support the mass of the machine and distribute the mass on the track shoes. At the same time, it also relies on its roller flange to clamp the chain rail so as not to make the track slip laterally (derail), so as to ensure that the machinery moves along the track direction. The roller position at the front end shall ensure no interference when the tensioning wheel is adjusted to the final limit position and the buffer spring is compressed to the maximum value. There should be enough clearance between the tooth top of the drive sprocket and the hub of the roller to prevent mud accumulation
According to the structure, the roller can be divided into single side roller and double side roller, with sliding bearing and rolling shaft.

 

 

 

bulldozer track roller

 

The track roller body materials are generally 50Mn, 40Mn2, etc. the main process is casting or forging, machining, and then heat treatment. The hardness of the wheel surface after quenching should reach hrc52 ~ 58 to increase the wear resistance of the wheel surface. The machining accuracy of the roller axle is required to be high, generally it needs to be processed by numerical control machine to meet the requirements. There are more materials of 40Mn2, and quenching heat treatment should be carried out after processing. And the sliding bearing support and floating oil seal are used to prevent dust. The advantage of doing this is: generally, only one time of butter is added in an overhaul period, which simplifies the routine maintenance of the excavator.

 

Models available of excavator track roller for yanmar mini excavators:

VIO15,VIO20,VIO30-1,VIO30-2,VIO35,VIO40,VIO50-2,VIO55-2,VIO50-6,VIO55-6,VIO70,VIO75,B15,B37,B50 etc..
 

FAQ

1. What Is The Delivery Time?

Generally speaking, the delivery time is 20days to 45days.it depend on how many items for a order. But if the whole order are 200 serial track roller(bottom roller, lower roller), the delivery time is within 10days.

2. What Is MOQ For The Order?

Generally speaking, the MOQ is a full container load of 20 feet container. Under this condition, the single cost can be lowered. if customers ask for less full container load. It is also acceptable.

3. How Can You Control Your Quality?

When material come inside our factory, we need to analyze the material cost. And when front idlers and sprocket rims material are casted. We need to analyze the composition to see if the material is qualified or not. When track rollers, carrier rollers and front idlers are being assembled, we need to oil leakage testing. After several parts are heat treated, we need to check the hardness before all are done.And our inspectors will check the sizes at ramdom when parts are being machined or assembled. All of these can guarantee the parts with correct sizes and good quality.

 

Hot Tags: b50 excavator track roller, China, best, manufacturers, suppliers, factory, Track Roller ITR, Track Roller EC210, Track Roller SK400, Grader Side Cutter, Kubota Kx161 3 Track Roller, Bulldozer Lower Roller D3C

You Might Also Like

(0/10)

clearall