Quanzhou Sanqi Engineering Machinery Co.Ltd

enLanguage

​The assembly process of excavator

The assembly process of excavator is as follows:


(1) before disassembly and installation, first fix the structure and working device, list the parts one by one and get ready.


(2) when assembling all metal parts, they must be cleaned with synthetic cleaning agent. Before assembling, the fitting surface of parts must be lubricated with grease or hydraulic oil to ensure smooth assembly and prevent rust.


(4) put the dismantled parts in proper order, mark the connected parts to ensure correct assembly.


(5) if a part cannot be separated smoothly, check whether the bolts and nuts have not been removed or whether there is any interference with the adjacent parts before the removal with greater force.


(6) hit the parts, must pad a wood or plastic hammer, absolutely avoid hitting the parts directly with a hammer.


(7) before assembling hydraulic components, clean them and clean the adjacent parts. Cover the oil port with cover, joint, nut, etc. to prevent the external objects from entering.


(8) when lifting a heavy part, apply lifting equipment and keep balance.


(7) check whether each part is damaged, ineffective and worn, and repair or replace it if necessary.


(9) the assembly or removal of hydraulic components must be carried out at a clean site. Before assembling, each part must be cleaned with detergent and blown dry with compressed air. Avoid using cotton yarn or cotton cloth. All used O - rings must be renewed.


You Might Also Like

Send Inquiry